|
|
5. CHECKING STORED OR INTERMITTENT CODES NOTE: Diagnose and repair all active codes before diagnosing stored codes. Refer to the Table of Contents WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min- Reconnect all disconnected components and harness connectors. WARNING: To avoid personal injury or death, turn the ignition on, then reconnect the battery. • Wiggle the wiring harness and connectors of the related airbag circuit. • Continue the test until either a code becomes active or the problem area is isolated. In the previous steps you have attempted to recreate the conditions responsible for setting the DTC in question / Are any ACTIVE DTCs present? Yes >> Select the appropriate diagnostic procedure from the Table of Contents in this section. No >> No problem found at this time. Erase all codes before returning the vehicle to the customer. 8O - 62 RESTRAINTS - ELECTRICAL DIAGNOSTICS KJ |