Jeep Liberty KJ. Manual - part 1427

 

  Index      Jeep     Jeep Liberty KJ - service repair manual 2006 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1425  1426  1427  1428   ..

 

 

Jeep Liberty KJ. Manual - part 1427

 

 

CD CHANGER READ FAILURE

For a complete wiring diagram Refer to Section 8W

When Monitored:
Continuously with the ignition and CD Changer turned on.

Set Condition:
The code will set if a CD that is not formatted as a music CD is installed in the CD Changer.

Possible Causes

CD CHANGER READ FAILURE

Diagnostic Test

1.

CD CHANGER READ FAILURE

Replace the problem CD with a good, clean, unscratched, music CD.

Turn the radio on and select the good CD.

With the Scan Tool , read DTC’s.

Does the Scan Tool display CD CHANGER READ FAILURE?

Yes

>> Replace the CD Changer.

Perform BODY VERIFICATION TEST - VER 1.

No

>> Test Complete.

8A - 12

AUDIO/VIDEO - ELECTRICAL DIAGNOSTICS

KJ

CD CHANGER TEMPERATURE HIGH

For a complete wiring diagram Refer to Section 8W

When Monitored:
Continuously with the ignition and CD Changer turned on.

Set Condition:
The code will set if the temperature inside the CD Changer is above +65° C (+145° F).

Possible Causes

HIGH TEMPERATURE FAILURE

Diagnostic Test

1.

HIGH TEMPERATURE

With the Scan Tool, erase the audio DTC’s.

Start the engine and allow the engine to reach normal operating temperature.

If the vehicle has been in the hot sunlight or extreme cold move the vehicle indoors and open the doors to allow the
inside temperature to stabilize.

The CD Changer will operate between -23° C and 65° C (-10° F and +145° F).

With the Scan Tool, read DTC’s.

Does the Scan Tool display CD CHANGER TEMPERATURE HIGH?

Yes

>> Replace the CD Changer.

Perform BODY VERIFICATION TEST - VER 1.

No

>> Test Complete.

KJ

AUDIO/VIDEO - ELECTRICAL DIAGNOSTICS

8A - 13

CD PLAY FAILURE

For a complete wiring diagram Refer to Section 8W

When Monitored:
Continuously with the ignition and the radio CD player turned on.

Set Condition:
The code will set if a CD that is not formatted as a music CD or is scratched, dirty so the radio can not play
the CD.

Possible Causes

CD PLAY FAILURE

Diagnostic Test

1.

CD PLAY FAILURE

Replace the problem CD with a good, clean, unscratched, music CD.

Turn the radio CD player on.

With the Scan Tool, read DTC’s.

Does the Scan Tool display CD PLAY FAILURE?

Yes

>> Replace the Radio.

Perform BODY VERIFICATION TEST - VER 1.

No

>> Test Complete.

8A - 14

AUDIO/VIDEO - ELECTRICAL DIAGNOSTICS

KJ

CD READ FAILURE

For a complete wiring diagram Refer to Section 8W

When Monitored:
Continuously with the ignition and the radio CD player turned on.

Set Condition:
The code will set if a CD that is not formatted as a music CD is installed in the radio CD player.

Possible Causes

CD READ FAILURE

Diagnostic Test

1.

CD READ FAILURE

Replace the problem CD with a good, clean, unscratched, music CD.

Turn the radio CD player on.

With the Scan Tool, read DTC’s.

Does the Scan Tool display CD READ FAILURE?

Yes

>> Replace the Radio.

Perform BODY VERIFICATION TEST - VER 1.

No

>> Test Complete.

KJ

AUDIO/VIDEO - ELECTRICAL DIAGNOSTICS

8A - 15

 

 

 

 

 

 

 

Content   ..  1425  1426  1427  1428   ..