|
|
B1B87-PASSENGER SEAT WEIGHT SENSOR 1 - RIGHT REAR PERFORMANCE (CONTINUED) 3. INSPECT PASSENGER SEAT HARNESS WIRES & CONNECTORS WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min- Are any of these conditions present? Yes >> NOTE: Do not attempt to repair the Seat Harness. Replace the Seat Harness if the condition inspecting or Replace the Passenger Seat Harness in accordance with the Service Information. Perform OCS VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/RESTRAINTS - DIAGNOSIS No >> Go To 4 4. PERFORM OCCUPANT CLASSIFICATION MODULE SYSTEM VERIFICATION TEST Verify that all of the Seat Weight Sensor mounting screws are torqued to specification. Refer to 23 - BODY/SEATS. WARNING: To avoid personal injury or death, turn the ignition on, then reconnect the battery. NOTE: Failure to follow test instructions or aborting the test will cause faults to set when performing the With the scan tool, read OCM DTCs. Does the scan tool display any active PASSENGER SEAT WEIGHT SENSOR PERFORMANCE DTCs? Yes >> Perform the *Diagnosis/Checkout Procedure For Seat Weight Sensors. No >> Other DTCs Present?Diagnose and repair the DTCs. Refer to the Table of Contents in this Section for a complete list of symptoms. No >> Perform OCS VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/RESTRAINTS - DIAGNOSIS AND TESTING) 8O - 242 RESTRAINTS - ELECTRICAL DIAGNOSTICS WK |