|
|
B1B0C-PASSENGER AIRBAG SQUIB 2 CIRCUIT LOW (CONTINUED) 2. CHECK FOR SHORTED SQUIB CIRCUITS IN PASSENGER AIRBAG WARNING: To avoid personal injury or death, turn the ignition off, WARNING: To avoid personal injury or death, do not place an NOTE: Check connectors - Clean and repair as necessary. WARNING: To avoid personal injury or death, turn the ignition on, Does the scan tool display: B1B0C PASSENGER AIRBAG Yes >> Go To 3 No >> Replace the Passenger Airbag in accordance with the Ser- vice Information. Perform ORC VERIFICATION TEST - VER 1. (Refer to 8 - 3. CHECK (R64) PASSENGER SQUIB 2 LINE 1 CIRCUIT AND (R62) PASSENGER SQUIB 2 LINE 2 CIRCUIT WARNING: To avoid personal injury or death, turn the ignition off, Disconnect the ORC connectors. NOTE: Check connectors - Clean and repair as necessary. Measure the resistance of the (R64) Passenger Squib 2 Line 1 circuit Measure the resistance of the (R62) Passenger Squib 2 Line 2 circuit Is the resistance below 10K ohms on either circuit? Yes >> Repair the Passenger Squib 2 circuit(s) for a short to ground. Perform ORC VERIFICATION TEST - VER 1. (Refer to 8 - No >> Go To 4 8O - 86 RESTRAINTS - ELECTRICAL DIAGNOSTICS WK |