|
|
INSTALLATION 1. Install axle bushing (1) with Installer 5063 (2) and hammer. 2. Install axle shaft and seal. PINION SEAL REMOVAL 1. Remove wheels. 2. Push back brake pads and release hand brake. 3. Remove propeller shaft. 4. Rotate pinion with inch pound torque and record torque to rotate. 5. Mark installation position of collared nut with respect to drive pinion. 6. Bend pinion nut lock back with a punch and ham- mer. 7. Hold pinion flange (1) with Wrench C-3281(2) and remove pinion nut. 3 - 82 FRONT AXLE - C200F WK |