|
|
HVAC SYSTEM POINTER Pointer Number DESCRIPTION Value Displayed 01 A/C Enable 0 or 1 0 = disabled 1 = 02 Final fan PWM duty cycle 0 to 255 While the value of this pointer is being displayed, turning the right 03 Left NPRG * 0 to 255 * NPRG equals a calculated number based on outside and in-vehicle conditions. This value is used by the AZC to position the Mode motor, Air Inlet motor, and control blower motor speed. While the value of this pointer is being displayed, turning the right 04 Right NPRG 0 to 255 While the value of this pointer is being displayed, turning the right 05 Avg NPRG 0 TO 255 While the value of this pointer is being displayed, turning the right 06 Primary control side 0 or 1 0 = left 1 = right 07 EE Check sum (calculated) 0 to 255 08 Target intensity (in % ON time) 0 to 255 While the value of this pointer is being displayed, turning the right 09 Not Used 0 to 0 10 Not Used 0 to 0 11 Right NINC * 0 to 255 * NINC equals a calculated number based on the IR sensor and IR thermistor values used to calculate the NPRG. While the value of this pointer is being displayed, turning the right 12 Left NINC 0 to 255 While the value of this pointer is being displayed, turning the right 13 Right NMIX * 0 to 255 * NMIX equals a calculated number based on outside and in-vehicle conditions used by the AZC to position the Temperature motors. While the value of this pointer is being displayed, turning the right 24 - 18 HEATING AND AIR CONDITIONING WJ DIAGNOSIS AND TESTING (Continued) |