TEST
ACTION
APPLICABILITY
8
WARNING: Turn the ignition off, disconnect the battery and wait 2 minutes
before proceeding.
CAUTION: Do not place an intact undeployed airbag module face down on
a hard surface, the airbag module will propel into the air if accidently
deployed.
Remove the Driver Airbag Module.
Disconnect both remote radio switch harness connectors.
Disconnect the Clockspring C1 harness connector.
Measure the resistance of the Radio Control MUX Return circuit between the
inoperative remote radio switch and the clockspring connector.
Is the resistance below 5.0 ohms?
All
Yes
→
Go To
9
No
→
Repair the Radio Control MUX Return circuit for an open
between the inoperative switch and the clockspring.
Perform BODY VERIFICATION TEST - VER 1.
9
If there are no possible causes remaining, view repair.
All
Repair
Replace the inoperative Remote Radio Switch.
Perform BODY VERIFICATION TEST - VER 1.
115
AUDIO
*REMOTE RADIO CONTROLS INOPERATIVE —
Continued