|
|
(6) Feed sensor wires through floorpan access hole and seat sensor grommets in floorpan. (7) Remove support and lower the vehicle. sensor wires and connectors. (9) Connect sensor wires to harness connectors. G-SWITCH REMOVAL (1) Fold the rear seat bottom assembly up for access to the switch. (2) Lift up the carpeting and disconnect switch harness (Fig. 13). (3) Remove the switch mounting bolts and remove the switch. INSTALLATION CAUTION: The mercury switch (inside the G-Switch), will not function properly if the switch is Fig. 11 Sensor Mounting Bolt 1 – WHEEL SPEED SENSOR Fig. 12 Wheel Speed Sensor 1 – WHEEL SPEED SENSOR Fig. 13 G-Switch Mounting 1 – MOUNTING BOLTS Fig. 14 G-Switch 1 – SWITCH PART NUMBER MOUNTING 5 - 44 BRAKES WJ REMOVAL AND INSTALLATION (Continued) |