|
|
DAS LANE DEPARTURE WARNING LAMP DOES NOT TURNED ON DAS-397 < SYMPTOM DIAGNOSIS > [LDW & LDP] C D E F G H I J K L M B N P A LANE DEPARTURE WARNING LAMP DOES NOT TURNED ON Description INFOID:0000000006223834 The lane departure warning lamp in the combination meter does not turn ON when turning on the ignition Diagnosis Procedure INFOID:0000000006223835 1. CHECK LANE DEPARTURE WARNING LAMP 1. Check that “LANE DEPARTURE W/L” operate normally in “ACTIVE TEST” of “ICC/ADAS”. 2. Operate the test items to check that the lane departure warning lamp blinks Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 2. 2. CHECK COMBINATION METER Turn the ignition switch from OFF to ON to check that “LANE W/L” included in “DATA MONITOR” in “METER/ Is the inspection result normal? YES >> Replace the combination meter. Refer to MWI-85, "Removal and Installation" . NO >> GO TO 3. 3. CHECK SELF-DIAGNOSIS RESULTS OF COMBINATION METER 1. Perform “All DTC Reading” with CONSULT-III. 2. Check if the DTC is detected in self-diagnosis results of “METER/M&A”. Refer to Is any DTC detected? YES >> Repair or replace malfunctioning parts. NO >> GO TO 4. 4. CHECK SELF-DIAGNOSIS RESULTS OF ADAS CONTROL UNIT Check if the DTC is detected in self-diagnosis results of “ICC/ADAS” Refer to Is any DTC detected? YES >> Repair or replace malfunctioning parts. NO >> Replace the ADAS control unit. Refer to |