|
|
CCS U150E BCM CAN 3 CCS-151 < DTC/CIRCUIT DIAGNOSIS > [ICC] C D E F G H I J K L M B N P A U150E BCM CAN 3 DTC Logic INFOID:0000000006224424 DTC DETECTION LOGIC NOTE: "ADAS CONTROL UNIT : DTC Logic" . DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Start the engine. 2. Turn the MAIN switch of ICC system ON. 3. Perform “All DTC Reading” with CONSULT-III. 4. Check if the “U150E” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”. Is “U150E” detected as the current malfunction? YES >> Refer to CCS-151, "Diagnosis Procedure" NO >> Refer to GI-40, "Intermittent Incident" . Diagnosis Procedure INFOID:0000000006224425 1. CHECK SELF-DIAGNOSIS RESULTS Check if “U1000” is detected other than “U150E” in “Self Diagnostic Result” of “ICC/ADAS”. Is “U1000” detected? YES >> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts. CCS-145, "ADAS CONTROL UNIT : DTC Logic" NO >> GO TO 2. 2. CHECK BCM SELF-DIAGNOSIS RESULTS Check if any DTC is detected in “Self Diagnostic Result” of “BCM”. Is any DTC detected? YES >> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to NO >> Replace the ADAS control unit. Refer to DAS-63, "Removal and Installation" DTC (On board dis- play) Trouble diagnosis name DTC detecting condition Possible causes U150E (160) BCM CAN CIRC 3 ADAS control unit detects an error signal that is BCM |