|
|
Content .. 1361 1362 1363 1364 ..
WCS THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT SOUND WCS-45 < SYMPTOM DIAGNOSIS > C D E F G H I J K L M B A O P THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT Description INFOID:0000000006222694 • Seat belt warning chime does not sound. Diagnosis Procedure INFOID:0000000006222695 1. CHECK SEAT BELT WARNING LAMP 1. Turn ignition switch ON. 2. Check the operation of the seat belt warning lamp in the combination meter. Is the inspection result normal? YES >> GO TO 2. NO >> GO TO 4. 2. CHECK BCM OUTPUT SIGNAL Check if the seat belt warning chime is activated by performing BCM active test. Refer to CONSULT-III Function (BCM - BUZZER)" . Is the inspection result normal? YES >> INSPECTION END NO >> GO TO 3. 3. CHECK COMBINATION METER INPUT SIGNAL Check if buzzer switches to proper condition (On/Off) on data monitor of combination meter. Refer to . Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-85, "Removal and Installation" NO >> Replace BCM. Refer to BCS-81, "Removal and Installation" 4. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) CIRCUIT Perform the check for the seat belt buckle switch (driver side) circuit. Refer to . Is the inspection result normal? YES >> GO TO 5. NO >> Repair harness or connector. 5. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) Perform a unit check for the seat belt buckle switch (driver side). Refer to WCS-42, "Component Inspection" Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-85, "Removal and Installation" NO >> Replace seat belt buckle (driver side). Refer to SB-8, "SEAT BELT BUCKLE : Removal and Instal- . Seat belt fastened : OFF Seat belt not fastened : ON Buzzer active condition : On Buzzer non-active condition : Off |