|
|
Content .. 1035 1036 1037 1038 ..
PWC-60 < DTC/CIRCUIT DIAGNOSIS > POWER WINDOW SERIAL LINK Is the inspection result normal? YES >> Replace rear power window switch RH. Refer to PWC-74, "Removal and Installation" NO >> GO TO 2. 2. CHECK POWER WINDOW SERIAL LINK SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear power window switch RH connector. 3. Turn ignition switch ON. 4. Check voltage between rear power window switch RH harness connector and ground. Is the inspection result normal? YES >> Replace power window main switch. Refer to PWC-74, "Removal and Installation" NO >> GO TO 3. 3. CHECK POWER WINDOW SERIAL LINK CIRCUIT 1. Disconnect power window main switch connector. 2. Check continuity between power window main switch harness connector and rear power window switch 3. Check continuity between power window main switch harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK INTERMITTENT INCIDENT GI-40, "Intermittent Incident" >> INSPECTION END (+) (–) Signal (Reference value) Rear power window switch RH Connector Terminal D43 16 Ground JPMIA0013GB (+) (–) Voltage (V) (Approx.) Rear power window switch RH Connector Terminal D43 16 Ground 12 Power window main switch Rear power window switch RH Continuity Connector Terminal Connector Terminal D5 14 D43 16 Existed Power window main switch Ground Continuity Connector Terminal D5 14 Not existed |