|
|
TROUBLE DIAGNOSIS FOR SELF-DIAGNOSTIC ITEMS ACS-89 [ICC] C D E F G H I J L M A B ACS 2. CHECK VEHICLE SPEED SIGNAL With CONSULT-II ● With data monitor with CONSULT-II, check vehicle speed signal operates normally. OK or NG NG >> Replace ICC unit. Erase DTC, and perform self-diagnosis of ICC system again. OK >> GO TO 3. 3. CHECK SHIFT GEAR POSITION ● Check that gear positions are correct in A/T. OK or NG NG >> GO TO 4. OK >> GO TO 5. 4. CHECK TCM GEAR POSITION SIGNAL With CONSULT-II ● With TCM data monitor with CONSULT-II, check that gear positions are correct. OK or NG NG >> ● Perform TCM diagnosis. ● After repair, Erase DTC, and perform self-diagnosis of ICC system again. OK >> Replace ICC unit. Erase DTC, and perform self-diagnosis of ICC system again. 5. CHECK TCM TURBINE ROTATION With CONSULT-II ● With TCM data monitor with CONSULT-II, check that turbine rpm is normal. OK or NG NG >> ● Perform TCM diagnosis. ● After repair, Erase DTC, and perform self-diagnosis of ICC system again. OK >> Replace ICC unit. Erase DTC, and perform self-diagnosis of ICC system again. DTC 102 RADAR STAIN AKS002QZ 1. VISUAL INSPECTION (1) ● Check that there is no contamination and foreign material on ICC sensor body window. Yes or No Yes >> ● If any, remove them. ● After that, Erase DTC, Erase DTC and perform ICC system running test. Then perform self- No >> GO TO 2. 2. VISUAL INSPECTION (2) ● Check ICC sensor body window for cracks. Yes or No Yes >> ● Replace ICC sensor, and adjust laser beam. ● After that, Erase DTC, Erase DTC and perform ICC system running test. Then perform self- No >> GO TO 3. |