Infiniti M35/M45 Y50. Manual - part 903

ACTIVE AFS

LT-157

DATA MONITOR
Operation Procedure

Touch “ADAPTIVE” on “SELECT TEST ITEM” screen.

Touch “DATA MONITOR” on “SELECT DIAG MODE” screen.

Touch “ALL SIGNALS” or “SELECTION FROM MENU” on “SELECT MONITOR ITEM” screen.

When “SELECTION FROM MENU” is selected, touch items to be monitored. When “ALL SIGNALS” is
selected, all items will be monitored.

Touch “START”.

Touch “RECORD” while monitoring and status of the item being monitored can be recorded. To stop
recording, touch “STOP”.

Data Monitor item

ALL SIGNALS

Monitors all items.

SELECTION FROM MENU

Selects items and monitors them.

Monitors item

Measuring condition

Description

Operation or condition

Reference

value

STR ANGLE SIG

“

”

Steering wheel

Straight-ahead

Approx. 0

Displays steering angle based on
steering angle sensor signals.

Turned

Approx.

−

550

to 550

VHCL SPD

“ km/h ”

—

Displays vehicle speed based on
vehicle speed sensor signals.

SLCT LVR POSI

“ P – 1 ”

—

Displays A/T selector lever position
based on AT position indicator sig-
nals.

HEAD LAMP

“ ON/OFF ”

Lighting switch

2ND

Displays low beam headlamps on/off
status based on low beam status sig-
nal.

Out of 2ND

OFF

AFS SW

“ ON/OFF ”

AFS switch

Displays AFS switch ON/OFF position
based on AFS switch signals.

OFF

HI SEN OTP RR

“ V ”

Vehicle height
(With 18-inch wheel)

Unloaded vehi-

cle position

Approx. 2.5 V

Displays vehicle height value based
on height sensor signals.

Maximum

laden condition

Approx. 1.0 V

Vehicle height
(With 19-inch wheel)

Unloaded vehi-

cle position

Approx. 2.5 V

Maximum

laden condition

Approx. 1.3 V

LEV ACTR VLTG

“% ”

Low beam headlamp
auto aiming
(With 18-inch wheel)

Unloaded vehi-

cle position

Approx.

70.0%

Displays aiming motor drive signal
based on AFS control unit interpreta-
tion of various vehicle sensor signals.
The value is a ratio to IGN power sup-
ply.

Maximum

laden condition

Approx.

38.0%

Low beam headlamp
auto aiming
(With 19-inch wheel)

Unloaded vehi-

cle position

Approx.

70.0%

Maximum

laden condition

Approx.

41.8%

SWVL SEN RH*

“

”

Low beam headlamp
(right) swivel

OFF

Approx. 0

Displays low beam headlamp (right)
swivel angle based on swivel position
sensor signals (right).

SWVL SEN LH*

“

”

Low beam headlamp
(left) swivel

OFF

Approx. 0

Displays low beam headlamp (left)
swivel angle based on swivel position
sensor signals (left).

LT-158

ACTIVE AFS

CAUTION:

*: The value can be slightly different between that is displayed on “SWVL SEN RH/LH” and that on “SWVL ANGLE RH/LH”.

SWVL ANGLE RH*

“

”

Low beam headlamp
(right) swivel

OFF

Approx. 0

Displays swivel motor drive signal
(right) based on AFS control unit inter-
pretation of various vehicle sensor
signals.

SWVL ANGLE LH*

“

”

Low beam headlamp
(left) swivel

OFF

Approx. 0

Displays swivel motor drive signal
(left) based on AFS control unit inter-
pretation of various vehicle sensor
signals.

Monitors item

Measuring condition

Description

Operation or condition

Reference

value

ACTIVE AFS

LT-159

ACTIVE TEST
Operation Procedure

Start the engine. (Swivel actuator is initialized.)

Touch “ADAPTIVE LIGHT” on “SELECT SYSTEM” screen.

Touch “ACTIVE TEST” on “SELECT DIAG MODE” screen.

Touch “LOW BEAM TEST RIGHT”, “LOW BEAM TEST LEFT”, or “LEVELIZER TEST” on “SELECT TEST
ITEM” screen.

CAUTION:

Can be tested only when swivel actuator initialization is completed. If initialization is not com-
pleted, “RETRY COMMAND” is displayed and cannot be tested.

●

LOW BEAM TEST RIGHT
Low beam headlamp (right) can be operated to swivel angle
0

by touching “ORIGIN”, and to maximum angle by “PEAK”.

●

LOW BEAM TEST LEFT
Low beam headlamp (left) can be operated to swivel angle 0

by touching “ORIGIN”, and to maximum angle by “PEAK”.

●

LEVELIZER TEST
Aiming motor drive signal can be changed to approx. 85%
(ratio to IGN power supply) by touching “ORIGIN”, and to
approx. 15% by “PEAK”. That angles headlamp LO up and
down.

During the operation check, touching “BACK” deactivates the operation.

Test Item

Swivel Speed

Mode

ORIGIN/PEAK - FAST

Three times fast as SLOW

Normal operation

ORIGIN/PEAK - SLOW

—

Initialization

SKIB4794E

Test Item

Swivel Speed

Mode

ORIGIN/PEAK - FAST

Three times fast as SLOW

Normal operation

ORIGIN/PEAK - SLOW

—

Initialization

SKIB4795E

Test Item

Aiming Motor Drive Signal

Light Axis

(Reference Value)

Ratio to IGN

power supply

Voltage

ORIGIN

Approx. 85%

Approx. 10.6 V

PEAK

Approx. 15%

Approx. 1.9 V

Approx. 2.5

(Relatively lower than

that of origin)

SKIB4796E

LT-160

ACTIVE AFS

Symptom Chart

NKS003QN

CAUTION:

The low beam headlamps performs small movements when AFS control unit detects the engine start.
This is normal with initialization of swivel actuator by AFS control unit.

Symptom

AFS OFF

indicator

Causal system

Reference

●

AFS operates, but cannot judge normal/
abnormal.
(AFS function test)

Normal

Check swivel operation.

LT-182, "AFS

Operation

Check (Func-