Content .. 178 179 180 181 ..

Infiniti M35/M45 Y50. Manual - part 180

DIAGNOSIS SYSTEM

AV-97

[WITHOUT MOBILE ENTERTAINMENT SYSTEM]

VEHICLE CAN DIAGNOSIS

●

CAN communication status and error counter is displayed.

●

Error counter displays 0 if any malfunction is not detected in the
past. If the malfunction is detected, it displays 40. When turning
the ignition switch ON, if it is normal, it displays 39. The lower
limit of the counter is 1.

●

If it is reset, the error counter is deleted.

NOTE:
“???” indicates “UNKWN”.

AV COMM DIAGNOSIS

●

Displays the communication condition between AV (NAVI) con-
trol unit (master unit) and each unit and between audio unit
(sub-master unit) and each unit.

●

If it is reset, the error counter is deleted.

ITM: AV (NAVI) control unit

NOTE:
“???” indicates “UNKWN”.

Items

Display (Current)

Error counter

(Past)

Tx (HVAC)

OK /???

0 - 40

Rx (ECM)

OK /???

0 - 40

Rx (Cluster)

OK /???

0 - 40

Rx (BCM)

OK /???

0 - 40

Rx (HVAC)

OK /???

0 - 40

Rx (USM)

OK /???

0 - 40

Rx (TPMS)

OK /???

0 - 40

SKIB3666E

Items

Status

(Current)

Counter

(Past)

C Tx (ITM-PrimarySW)

OK /???

0 - 40

C Rx (PrimarySW-ITM)

OK /???

0 - 40

C Rx (STRG SW-ITM)

OK /???

0 - 40

C Rx (RrSeatSW-ITM)

OK /???

0 - 40

C Rx (Audio-ITM)

OK /???

0 - 40

C Rx (Amp-ITM)

OK /???

0 - 40

C Rx (RearCamera-ITM)

OK /???

0 - 40

C Rx (DVD-ITM)

OK /???

0 - 40

C Rx (Amp-Audio)

OK /???

0 - 40

C Rx (DVD-Audio)

OK /???

0 - 40

SKIB3667E

AV-98

[WITHOUT MOBILE ENTERTAINMENT SYSTEM]

DIAGNOSIS SYSTEM

HANDSFREE PHONE
Handsfree Volume Adjustment

The received volume adjustment of hands-free phone can be
adjusted to Low, Medium, and High settings.

Voice Microphone Test

When this function is turned “ON”, the voice that is input to microphone is output to front speaker via TEL voice
signal line. The microphone and TEL voice signal line can be checked.

Delete Handsfree Memory

Erase the memory related to the hands-free phone.

SKIB3668E

DIAGNOSIS SYSTEM

AV-99

[WITHOUT MOBILE ENTERTAINMENT SYSTEM]

CAMERA CONT.

There are 2 functions: “Connection Confirmation”, “Adjust offset of rear view camera”.

Connection Confirmation

The input signals of steering angle sensor signal, reverse signal, and
vehicle speed signal can be checked.

Adjust Offset of Rear View Camera

If the adjustment of rear view monitor guiding line display position is
necessary when rear view camera is removed, use this mode to
adjust it.

SKIB3688E

Diagnosis item

Display

Vehicle status

Steering Angle Sensor

It turns ON when the steering is turning with the ignition switch ON (Once it turns
ON, it does not change during Connection Confirmation mode)

OFF

Turn ignition switch ACC
It turns OFF when the steering is not turning with the ignition switch ON

—

Camera-connection recognition signal malfunction

Reverse Sensor

Selector lever in R position with ignition switch ON

OFF

Turn ignition switch ACC
Selector lever in any position other than R with ignition switch ON

—

Camera-connection recognition signal malfunction

Vehicle Speed Sensor

When vehicle speed is 0 km/h or more with ignition switch ON

OFF

Turn ignition switch ACC
When vehicle speed is 0 km/h with ignition switch ON

—

Camera-connection recognition signal malfunction

SKIB3689E

AV-100

[WITHOUT MOBILE ENTERTAINMENT SYSTEM]

DIAGNOSIS SYSTEM

BLUETOOTH
Confirm/Change Passkey

●

The passkey of Bluetooth can be confirmed and changed.

●

The passkey can be changed by four digits within 0 to 9.

Confirm/Change Device Name

●

The device name of Bluetooth can be confirmed and changed.

●

The device name can be changed by sixteen digits within A to Z
(small characters can be used) and - (hyphen).

DELETE UNIT CONNECTION LOG

Erase the connection history of unit and error history that is recorded
in AV (NAVI) control unit (clear the connection history of the removed
unit).

SKIB3669E

SKIB3670E

SKIB3671E

Content .. 178 179 180 181 ..