Infiniti M35/M45 Y50. Manual - part 1110

 

  Index      Infiniti     Infiniti M35/M45 Y50 - service repair manual 2007 year

 

Search            copyright infringement  

 

 

 

 

 

 

 



 

 

Content   ..  1108  1109  1110  1111   ..

 

 

Infiniti M35/M45 Y50. Manual - part 1110

 

 

COLLISION DIAGNOSIS

SRS-55

C

D

E

F

G

I

J

K

L

M

A

B

SRS

Steering wheel

                                                     [same text as in current manual]

Spiral cable

If the Driver airbag has deployed:
REPLACE the spiral cable.

If the Driver airbag has not deployed:
[same text as in current manual]

Harness and con-
nectors

1. Check connectors for poor connection, damage, and terminals for deformities.

2. Check harness for binding, chafing, cuts, or deformities.

3. If no damage is found, reinstall the harness and connectors.

4. If damaged—REPLACE damaged section of harness. Do not repair, splice or modify any SRS harness.

Instrument panel

1. Visually check instrument panel for damage.

2. If no damage is found, reinstall the instrument panel.

3. If damaged—REPLACE the instrument panel with bolts.

Part

SRS is activated

SRS is NOT activated

SRS-56

COLLISION DIAGNOSIS

For Side Collision

NHS0009M

WHEN THE SIDE AIR BAG IS ACTIVATED IN THE SIDE COLLISION:

1.

Replace the following components:

All parts of front seatback (including front seatback frame) with front side air bag module (on the side on
which front side air bag is activated)

Curtain air bag module (on the side on which side curtain air bag is activated)

Diagnosis sensor unit

Satellite sensor (on the side on which side air bag and side curtain air bag is activated)

2.

Check the SRS components and the related parts using the following table.

Replace any SRS components and the related parts showing visible signs of damage (dents, cracks,
deformation).

3.

Conduct self-diagnosis using CONSULT-II or “AIR BAG” warning lamp. Refer to 

SRS-20, "SRS Operation

Check"

 . Ensure entire SRS operates properly.

WHEN SRS IS NOT ACTIVATED IN THE SIDE COLLISION:

1.

Check the SRS components and the related parts using the following table.

Replace any SRS components and the related parts showing visible signs of damage (dents, cracks,
deformation).

2.

Conduct self-diagnosis using CONSULT-II or “AIR BAG” warning lamp. Refer to 

SRS-20, "SRS Operation

Check"

 . Ensure entire SRS operates properly.

SRS INSPECTION (FOR SIDE COLLISION)

Part

Front side air bag and 

side curtain air bag is 

activated

Front side air bag and side curtain air bag is NOT activated

LH or RH side curtain 
air bag module

REPLACE the side 
curtain air bag mod-
ule.
(Repair the center pil-
lar inner, etc. before 
installing new one if 
damaged.)

1. Check for visible signs of damage (dents, tears, deformation) of the center pillar on 

the collision side.

2. If damaged— Remove the LH or RH side curtain air bag module.

3. Check for visible signs of damaged (tears etc.) of the LH or RH side curtain air bag 

module.

4. Check harness and connectors for damage, and terminals for deformities.

5. If no damage is found, reinstall the LH or RH side curtain air bag module with new 

bolts.

6. If damaged—REPLACE the LH or RH side curtain air bag module with new bolts.

Front LH or RH side 
air bag module

REPLACE all parts of 
seatback with 
deployed front side 
air bag module.

1. Check for visible signs of damage (dents, tears, deformation) of the seatback on 

the collision side.

2. Check harness and connectors for damage, and terminals for deformities.

3. If damaged—REPLACE the front seatback assembly.

LH or RH side air bag 
(Satellite) sensor

REPLACE the side 
air bag (Satellite) sen-
sor on the collision 
side with new nuts.
(Repair the center pil-
lar inner, etc. before 
installing new one if 
damaged.)

1. Remove the LH or RH side air bag (Satellite) sensor on the collision side. Check 

harness connectors for damage, terminals for deformities, and harness for binding.

2. Check for visible signs of damage (dents, cracks, deformation) of the LH or RH 

side air bag (Satellite) sensor.

3. Install the LH or RH side air bag (Satellite) sensor to check fit.

4. If no damage is found, reinstall the LH or RH side sir bag (Satellite) sensor with 

new nuts.

5. If damaged—REPLACE the LH or RH side air bag (Satellite) sensor with new nuts.

Diagnosis sensor unit

REPLACE the diag-
nosis sensor unit with 
the new bolts.

1. Check case and bracket for dents, cracks or deformities.

2. Check connectors for damage, and terminals for deformities.

3. If no damage is found, reinstall the diagnosis sensor unit with new bolts and ground 

bolt.

4. If damaged—REPLACE the diagnosis sensor unit with new bolts and ground bolt.

COLLISION DIAGNOSIS

SRS-57

C

D

E

F

G

I

J

K

L

M

A

B

SRS

Seat belt pre-ten-
sioner assembly

1. Check if the seat belt can be extended smoothly.

If the seat belt cannot be extended smoothly,

Check for deformities of the center pillar inner.

If the center pillar inner has no damage, REPLACE the seat belt pre-tensioner assembly.

2. Remove the seat belt pre-tensioner assembly on the collision side. Check harness cover and connectors 

for damage, terminals for deformities, and harness for binding.

3. Check for visible signs of damage (dents, cracks, deformation) of the seat belt pre-tensioner assembly.

4. Check seat belt adjuster for damage.

5. If no damage is found, reinstall the seat belt pre-tensioner assembly.

6. If damaged—REPLACE the seat belt pre-tensioner assembly with new bolts.

Seat with front side 
air bag

REPLACE all parts of 
front seatback 
(including front seat-
back frame)

1. Visually check the seat on the collision side.

2. Remove the seat on the collision side and check the following for damage and 

deformities.

Harness, connectors and terminals

Frame and recliner (for front and rear seat), and also adjuster and slides (for front 
seat)

3. If no damage is found, reinstall the seat.

4. If damaged—REPLACE the damaged seat parts using new bolts.

Center inner pillar

1. Check the center inner pillar on the collision side for damage (dents, cracks, deformation).

2. If damaged—REPAIR the center inner pillar.

Trim/headlining

1. Check for visible signs of damage (dents, cracks, deformation) of the interior trim on the collision side.

2. If damaged—REPLACE the damaged trim parts.

Part

Front side air bag and 

side curtain air bag is 

activated

Front side air bag and side curtain air bag is NOT activated

SRS-58

COLLISION DIAGNOSIS

 

 

 

 

 

 

 

Content   ..  1108  1109  1110  1111   ..