|
|
Control Panel Mode =NHEL0301 APPLICATION ITEMS NHEL0301S01 Mode Description Reference page Display Auto Open Display can be set to open by either of the following controls. I Display will be opened when OPEN/CLOSE SW is selected with Key SW positioned I Display will be automatically opened when Key SW is turned from OFF to ACC. GPS Information The GPS data includes longitude, latitude and altitude (distance above sea level) of the Quick Stop Customer One facility of your selection can be added to your Quick Stop. Route Priorities Priorities of search request and automatic re-searching can be set for route search. Tracking Tracking to the present vehicle position can be displayed. Display Setting The following display settings can be customized. I Display color (Day mode or Night mode) I Brightness of display Heading Heading of the map display can be customized for either north heading or the actual Nearby Display Icons Icons of facilities can be displayed. Adjust Current Loca- Current location of position marker can be adjusted. Direction of position marker also Avoid Area Setting Particular area can be avoided when routing. — Beep On/Off Beep sounds which corresponds to the system operation can be activated/deactivated. Clear Memory Address book, Previous destination or Avoid area can be deleted. SEL633X HOW TO PERFORM CONTROL PANEL MODE NHEL0301S02 1. Start the engine. 2. Push “OPEN/CLOSE” switch and then open the display. 3. Push “SETTING” switch. I For further procedures, refer to the following pages which SEL619X “DISPLAY AUTO OPEN” MODE NHEL0301S03 1. Start the engine. 2. Push “OPEN/CLOSE” switch and then open the display. 3. Push “SETTING” switch. 4. Select “System Setting”. GI MA EM LC EC FE AT AX SU BR ST RS BT HA SC IDX NAVIGATION SYSTEM Control Panel Mode EL-425 |