|
|
INL-18 < FUNCTION DIAGNOSIS > DIAGNOSIS SYSTEM (BCM) ACTIVE TEST *: Each lamp switch is in ON position. Monitor item [Unit] Description REQ SW-DR The switch status input from request switch (driver side) REQ SW-AS The switch status input from front request switch (passenger side) REQ SW-RR NOTE: REQ SW-RL PUSH SW The switch status input from push-button ignition switch ACC RLY-F/B ACC relay feedback signal status input from ACC relay KEY SW-SLOT Key switch status input from key slot UNLK SEN-DR Driver door unlock status input from unlock sensor DOOR SW-DR The switch status input driver side front door switch DOOR SW-AS The switch status input from passenger side door switch DOOR SW-RR NOTE: DOOR SW- RL NOTE: DOOR SW-BK NOTE: CDL LOCK SW Lock switch status received from the door lock and unlock switch by power window CDL UNLOCK SW Unlock switch status received from the door lock and unlock switch by power window KEY CYL LK-SW Lock switch status received from key cylinder switch by power window switch serial KEY CYL UN-SW Unlock switch status received from key cylinder switch by power window switch serial TRNK/HAT MNTR The switch status input from trunk room lamp switch RKE-LOCK Lock signal status received from remote keyless entry receiver RKE-UNLOCK Unlock signal status received from remote keyless entry receiver Test item Operation Description BATTERY SAVER Off Cuts the interior room lamp power supply to turn interior room lamp OFF. On Outputs the interior room lamp power supply to turn interior room lamp ON.* |