|
|
ECM EC-513 < ECU DIAGNOSIS > [VQ37VHR] C D E F G H I J K L M A EC N P O ECU DIAGNOSIS ECM Reference Value INFOID:0000000001734347 VALUES ON THE DIAGNOSIS TOOL NOTE: * Specification data may not be directly related to their components signals/values/operations. CONSULT-III MONITOR ITEM Monitor Item Condition Values/Status ENG SPEED • Run engine and compare CONSULT-III value with the tachometer indication. Almost the same speed as MAS A/F SE-B1 . MAS A/F SE-B2 . B/FUEL SCHDL . A/F ALPHA-B1 . A/F ALPHA-B2 . COOLAN TEMP/S • Ignition switch: ON Indicates engine coolant A/F SEN1 (B1) • Engine: After warming up Maintaining engine speed at 2,000 rpm Fluctuates around 2.2 V A/F SEN1 (B2) • Engine: After warming up Maintaining engine speed at 2,000 rpm Fluctuates around 2.2 V HO2S2 (B1) • Revving engine from idle up to 3,000 rpm quickly after the following conditions are met. - Engine: After warming up idle for 1 minute under no load 0 - 0.3V ←→ Approx. 0.6 - 1.0V HO2S2 (B2) • Revving engine from idle up to 3,000 rpm quickly after the following conditions are met. - Engine: After warming up idle for 1 minute under no load 0 - 0.3V ←→ Approx. 0.6 - 1.0V HO2S2 MNTR (B1) • Revving engine from idle up to 3,000 rpm quickly after the following conditions are met. - Engine: After warming up idle for 1 minute under no load LEAN ←→ RICH HO2S2 MNTR (B2) • Revving engine from idle up to 3,000 rpm quickly after the following conditions are met. - Engine: After warming up idle for 1 minute under no load LEAN ←→ RICH VHCL SPEED SE • Turn drive wheels and compare CONSULT-III value with the speedometer indi- cation. Almost the same speed as BATTERY VOLT • Ignition switch: ON (Engine stopped) 11 - 14V ACCEL SEN 1 • Ignition switch: ON (Engine stopped) Accelerator pedal: Fully released 0.45 - 1.00V Accelerator pedal: Fully depressed 4.4 - 4.8V ACCEL SEN 2* 1 • Ignition switch: ON (Engine stopped) Accelerator pedal: Fully released 0.45 - 1.00V Accelerator pedal: Fully depressed 4.3 - 4.8V |