|
|
Content .. 1218 1219 1220 1221 ..
SRC-130 < COMPONENT DIAGNOSIS > B1209 FRONTAL COLLISION DETECTION Check front air bag module. (driver air bag module and/or passenger air bag module.) Is the front air bag module deployed? YES >> Replace front air bag module. NO >> GO TO 2. 2. CHECK FRONT SEAT BELT PRE-TENSIONER Check front seat belt pre-tensioner. Is the front seat belt pre-tensioner activated? YES >> Replace front seat belt pre-tensioner. NO >> GO TO 3. 3. CHECK DIAGNOSIS SENSOR UNIT Check diagnosis sensor unit. YES >> Replace diagnosis sensor unit (ACU). NO >> GO TO 4. 4. CHECK STEERING WHEEL Check steering wheel. Is the steering wheel normal? YES >> GO TO 5. NO >> Replace steering wheel. 5. CHECK SPIRAL CABLE 1. Check the continuity of spiral cable.Refer to SRC-42, "Diagnosis Procedure (Component diagnosis)" 2. Operate the steering wheel to check excessive heavy operation force, abnomal noise or damage. Is the inspection result normal? YES >> GO TO 6. NO >> Replace spiral cable. 6. CHECK WIRING HARNESS Check wiring harness. Is the wiring harness normal? YES >> GO TO 7. NO >> Repair or replace wiring harness/harness connector. 7. FINAL CHECK Check the screen of CONSULT-III and/or Air bag warning lamp status. YES >> INSPECTION END. NO >> Check the intermittent incident. Refer to GI-38, "Intermittent Incident" . |