|
|
Content .. 1099 1100 1101 1102 ..
SE-72 < COMPONENT DIAGNOSIS > SLIDING MOTOR 2. Disconnect passenger seat control unit connector and sliding motor connector. 3. Check continuity between passenger seat control unit harness connector and sliding motor harness con- 4. Check continuity between passenger seat control unit harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness. 2. CHECK SLIDING MOTOR SE-72, "PASSENGER SIDE : Component Inspection" Is the inspection result normal? YES >> Replace passenger seat control unit. Refer to SE-165, "Removal and Installation" . NO >> Repair or replace the malfunctioning part. PASSENGER SIDE : Component Inspection INFOID:0000000001907882 1. CHECK SLIDING MOTOR-1 Check visually the sliding motor to see if any foreign object is not disturbing the functioning or if the sliding Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace seat cushion frame (sliding motor). 2. CHECK SLIDING MOTOR-2 1. Turn ignition switch OFF. 2. Disconnect sliding motor connector. 3. Supply sliding motor terminals with battery voltage and check operation. Is the inspection result normal? YES >> Sliding motor is OK. NO >> Replace sliding motor. (Built in seat cushion frame.) passenger seat control unit connector Terminal Sliding motor connector Terminal Continuity B553 35 B567 35 Existed 42 42 passenger seat control unit connector Terminal Ground Continuity B553 35 Not existed 42 Terminal Operation (+) (–) 35 42 Forward 42 35 Backward |