|
|
ADP-130 < COMPONENT DIAGNOSIS > DOOR MIRROR MOTOR DOOR MIRROR MOTOR DRIVER SIDE DRIVER SIDE : Description INFOID:0000000001693776 It makes mirror face operate from side to side and up and down with the electric power that automatic drive DRIVER SIDE : Component Function Check INFOID:0000000001693777 1. CHECK FUNCTION 1. Select “MIRROR MOTOR LH” in “Active Test” mode with CONSULT-III. 2. Check the telescopic motor operation. Is the inspection result normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to ADP-130, "DRIVER SIDE : Diagnosis Procedure" DRIVER SIDE : Diagnosis Procedure INFOID:0000000001693778 1. CHECK DOOR MIRROR MOTOR INPUT SIGNAL 1. Turn ignition switch ON. 2. Check voltage between door mirror connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 2. 2. CHECK HARNESS CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect automatic drive positioner control unit connector and door mirror connector. 3. Check continuity between automatic drive positioner control unit connector and door mirror connector. Test item Description MIRROR MOTOR LH OFF Driver side door mirror Stop UP Upward DOWN Downward LEFT Leftward RIGHT Rightward Terminals Door mirror remote control switch condition Voltage (V) (Approx.) (+) (–) Door mirror connector Terminal D3 5 Ground UP Battery voltage Other than above 0 6 LEFT Battery voltage Other than above 0 7 DOWN / RIGHT Battery voltage Other than above 0 Automatic drive positioner con- trol unit connector Terminal Door mirror (driver side) connec- tor Terminal Continuity |