|
|
AUTO ANTI-DAZZLING INSIDE MIRROR CIRCUIT MIR-19 < COMPONENT DIAGNOSIS > [WITH ADP] C D E F G H I J K M A B MIR N O P AUTO ANTI-DAZZLING INSIDE MIRROR CIRCUIT Description INFOID:0000000000962328 It automatically changes according to the brightness of the light that is reflected from the headlight of the vehi- Component Function Check INFOID:0000000000962329 1. CHECK AUTO ANTI-DAZZLING INSIDE MIRROR FUNCTION Check that glare-proof mirror can operate when mirror sensor is illuminated. YES >> Auto anti-dazzling inside mirror function is OK. NO >> Refer to . Diagnosis Procedure INFOID:0000000000962330 1. CHECK POWER SUPPLY CIRCUIT Check voltage between auto anti-dazzling inside mirror connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness. 2. CHECK GROUND CIRCUIT 1. Disconnect auto anti-dazzling inside mirror connector. 2. Check continuity between auto anti-dazzling inside mirror connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace harness. 3. CHECK INTERMITTENT INCIDENT Check intermittent incident. GI-39, "Intermittent Incident" . Is the inspection result normal? YES >> Replace auto anti-dazzling inside mirror. Refer to MIR-66, "Removal and Installation" . NO >> Repair or replace the malfunctioning parts. (+) (-) Condition of ignition switch Voltage (V) (Approx.) Auto anti-dazzling inside mirror connector Terminal Ground R3 6 ON or START Battery voltage 10 OFF Battery voltage Auto anti-dazzling inside mirror connector Terminal Ground Continuity R3 8 Existed |