Infiniti G35 (V35) Sedan. Manual - part 918
BODY MAINTENANCE
MA-37
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
BODY MAINTENANCE
LOCKS, HINGES AND HOOD LATCH
LOCKS, HINGES AND HOOD LATCH : Lubricating
INFOID:0000000000967350
For hood lock illustration. Refer to
DLK-190, "HOOD ASSEMBLY : Exploded View"
.
For door lock illustration. Refer to
DLK-207, "FRONT DOOR LOCK : Exploded View"
and
For trunk lid lock illustration. Refer to
DLK-215, "TRUNK LID LOCK : Exploded View"
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS : Inspection
INFOID:0000000000967351
For front seat belt illustration. Refer to
SB-5, "SEAT BELT RETRACTOR : Exploded View"
For rear seat belt illustration. Refer to
SB-9, "SEAT BELT RETRACTOR : Exploded View"
.
CAUTION:
• After any collision, inspect all seat belt assemblies, including retractors and other attached hard-
wares (I.e. anchor bolt, guide rail set). Nissan recommends to replace all seat belt assemblies in use
during a collision, unless not damaged and properly operating after minor collision.
Also inspect seat belt assemblies not in use during a collision, and replace if damaged or improperly
operating.
Seat belt pre-tensioner should be replaced even if the seat belts are not in use during a frontal colli-
sion where the driver and passenger air bags are deployed.
• If any component of seat belt assembly is questionable, do not repair.
Replace as seat belt assembly.
• If webbing is cut, frayed, or damaged, replace belt assembly.
• Never oil tongue and buckle.
• Use a genuine NISSAN seat belt assembly.
For details, refer to
SB-3, "SEAT BELT RETRACTOR : Inspection"
SB-8, "SEAT BELT RETRACTOR : Inspec-
in SB section.
• Check anchors for loose mounting
• Check belts for damage
• Check retractor for smooth operation
• Check function of buckles and tongues when buckled and released