|
|
EXL-154 < ECU DIAGNOSIS > [XENON TYPE] IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) 13 (Y) Ground Fuel pump power supply Output Approximately 1 second or more after 0 V • Approximately 1 second after turning the ignition switch ON • Engine running Battery voltage 16 (LG) Ground Front wiper auto stop Input Ignition Front wiper stop position 0 V Any position other than Battery voltage 19 (W) Ground Ignition relay power supply Output Ignition switch OFF 0 V Ignition switch ON Battery voltage 25 (G) Ground Ignition relay power supply Output Ignition switch OFF 0 V Ignition switch ON Battery voltage 26* 1 (R) Ground Ignition relay power supply Output Ignition switch OFF 0 V Ignition switch ON Battery voltage 27 (O) Ground Ignition relay monitor Input Ignition switch OFF or ACC Battery voltage Ignition switch ON 0 V 28 (L) Ground Push-button ignition Input Press the push-button ignition switch 0 V Release the push-button ignition switch Battery voltage 30 (GR) Ground Starter relay control Input A/T mod- A/T selector lever in any 0 V A/T selector lever P or N Battery voltage M/T mod- Release the clutch pedal 0 V Depress the clutch pedal Battery voltage 32 (L) Ground Steering lock unit condi- Input Steering lock is activated 0 V Steering lock is deactivated Battery voltage 33 (P) Ground Steering lock unit condi- Input Steering lock is activated Battery voltage Steering lock is deactivated 0 V 36 (G) Ground Battery power supply Input Ignition switch OFF Battery voltage 39 (P) — CAN - L Input/ Output — — 40 (L) — CAN - H Input/ Output — — 41 (B/W) Ground Ground — Ignition switch ON 0 V 42 (Y) Ground Cooling fan relay control Input Ignition switch OFF or ACC 0 V Ignition switch ON 0.7 V 43 (SB) Ground A/T device Input Ignition Press the A/T selector but- Battery voltage • A/T selector lever in any position other than P • Release the A/T selec- tor button (A/T selector 0 V 44 (W) Ground Horn relay control Input The horn is deactivated Battery voltage The horn is activated 0 V Terminal No. (Wire color) Description Condition Value (Approx.) Signal name Input/ Output + − |