|
|
EC-194 < COMPONENT DIAGNOSIS > [VQ35HR] P0132, P0152 A/F SENSOR 1 P0132, P0152 A/F SENSOR 1 Description INFOID:0000000000956590 The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sen- Therefore, the A/F sensor 1 is able to indicate air fuel ratio by this ° C (1,472 ° F). DTC Logic INFOID:0000000000956591 DTC DETECTION LOGIC To judge the malfunction, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at >> GO TO 2. 2. CHECK A/F SENSOR FUNCTION With CONSULT-III 1. Start engine and warm it up to normal operating temperature. 2. Select “A/F SEN1 (B1)” or “A/F SEN1 (B2)” in “DATA MONITOR” mode with CONSULT-III. 3. Check “A/F SEN1 (B1)” or “A/F SEN1 (B2)” indication. With GST Follow the procedure “With CONSULT-III” above. Is the indication constantly approx. 5V? JMBIA0112GB PBIB3354E DTC No. Trouble diagnosis name DTC detecting condition Possible Cause P0132 Air fuel ratio (A/F) sensor 1 • The A/F signal computed by ECM from the A/F sensor 1 signal is constantly approx. 5V. • Harness or connectors (The A/F sensor 1 circuit is open or • A/F sensor 1 P0152 Air fuel ratio (A/F) sensor 1 |