|
|
DLN-70 < DISASSEMBLY AND ASSEMBLY > [TRANSFER: ETX13B] MAINSHAFT 2. Remove snap ring from mainshaft. 3. Remove spacer from mainshaft. 4. Remove electric controlled coupling and sprocket from main- 5. Remove needle bearing from mainshaft. Assembly INFOID:0000000000957297 1. Install needle bearing to mainshaft. CAUTION: Apply ATF to periphery of needle bearing. 2. Install sprocket and electric controlled coupling to mainshaft. 3. Install spacer to main shaft. 4. Install snap ring to mainshaft. CAUTION: Never reuse snap ring. 5. Install mainshaft assembly to rear case, then install front case Inspection INFOID:0000000000957298 Check items below. If necessary, replace them with new ones. CASES • Contact surfaces of bearing for wear, damage, etc. BEARING SDIA1602E PDIA0273E SDIA1602E PDIA0293E |