Infiniti G35 (V35) Sedan. Manual - part 1498

FRONT WIPER ARM

WW-85

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

Adjustment

INFOID:0000000000962673

WIPER BLADE POSITION ADJUSTMENT

Clearance between the end of cowl top cover and the top of wiper blade center.

Standard clearance

R

: 35.0

±

7.5 mm (1.38 

±

 0.295 in)

L

: 72.0

±

7.5 mm (2.83 

±

 0.295 in)

JPLIA0082ZZ

WW-86

< ON-VEHICLE REPAIR >

FRONT WIPER DRIVE ASSEMBLY

FRONT WIPER DRIVE ASSEMBLY

Exploded View

INFOID:0000000000962674

REMOVAL VIEW

DISASSEMBLY VIEW

Removal and Installation

INFOID:0000000000962675

REMOVAL

1.

Remove wiper arm. Refer to 

WW-84, "Removal and Installation"

.

2.

Remove cowl top cover. Refer to 

EXT-18, "Removal and Installation"

.

3.

Remove bolts from the front wiper drive assembly.

1.

Front wiper drive assembly

JPLIA0069ZZ

1.

Wiper linkage 1

2.

Shaft seal

3.

Front wiper motor

4.

Wiper frame

5.

Wiper linkage 2

: Multi

−

purpose grease or an equivalent.

JPLIA0070ZZ

FRONT WIPER DRIVE ASSEMBLY

WW-87

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

4.

Disconnect the front wiper motor connector.

5.

Remove front wiper drive assembly from the vehicle.

INSTALLATION

1.

Install the front wiper drive assembly to the vehicle.

2.

Connect the front wiper motor connector.

3.

Operate the front wiper to move it to the auto stop position.

4.

Install the cowl top cover. Refer to 

EXT-18, "Removal and Installation"

.

5.

Attach wiper arms. Refer to 

WW-84, "Removal and Installation"

.

Disassembly and Assembly

INFOID:0000000000962676

DISASSEMBLY

1.

Remove the wiper linkage 1 and 2 from the front wiper drive assembly.

CAUTION:

Do not bend the linkage or damage the plastic part of the ball joint when removing the wiper link-
age.

2.

Remove the front wiper motor mounting screws, and then remove the front wiper motor from the wiper
frame.

ASSEMBLY

1.

Connect the front wiper motor connector.

2.

Operate the front wiper to move it to the auto stop position.

3.

Disconnect the front wiper motor connector.

4.

Install front wiper motor to wiper frame.

5.

Install the wiper linkage 2 to the wiper motor and the wiper frame.

6.

Install the wiper linkage 1 to the wiper frame.

CAUTION:

• Do not drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the wiper motor and wiper linkage joint (retainer). Apply

Multi

−

purpose grease or an equivalent if necessary.

WW-88

< ON-VEHICLE REPAIR >

FRONT WIPER AND WASHER SWITCH

FRONT WIPER AND WASHER SWITCH

Exploded View

INFOID:0000000000962677

Refer to 

BCS-80, "Exploded View"

.BCS- Combination switch component view