|
|
ADP-122 < COMPONENT DIAGNOSIS > SLIDING MOTOR SLIDING MOTOR Description INFOID:0000000000960729 • The seat sliding motor is installed to the seat cushion frame. Component Function Check INFOID:0000000000960730 1. CHECK FUNCTION 1. Select “SEAT SLIDE” in “Active test” mode with CONSULT-III. 2. Check the sliding motor operation. Is the operation of relevant parts normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to ADP-122, "Diagnosis Procedure" Diagnosis Procedure INFOID:0000000000960731 1. CHECK SLIDING MOTOR POWER SUPPLY 1. Turn ignition switch OFF. 2. Disconnect sliding motor connector. 3. Turn the ignition switch ON. 4. Perform “Active test” (“SEAT SLIDE”) with CONSULT-lll 5. Check voltage between sliding motor harness connector and ground. Is the inspection result normal? YES >> Replace sliding motor. (Built in seat slide cushion frame.) NO >> GO TO 2. 2. CHECK SLIDING MOTOR CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect driver seat control unit connector. 3. Check continuity between driver seat control unit harness connector and sliding motor harness connector. Test item Description SEAT SLIDE OFF Seat sliding Stop FR Forward RR Backward Terminal Test item Voltage (V) (Approx.) (+) (-) Sliding motor connector Terminal B461 35 Ground SEAT SLIDE OFF 0 FR (forward) Battery voltage RR (backward) 0 42 OFF 0 FR (forward) 0 RR (backward) Battery voltage Driver seat control unit connector Terminal Sliding motor connector Terminal Continuity B452 35 B461 35 Existed 42 42 |