Infiniti FX35 / FX45. Manual - part 936

 

  Index      Infiniti     Infiniti FX35 / FX45 (S50) - service repair manual 2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  934  935  936  937   ..

 

 

Infiniti FX35 / FX45. Manual - part 936

 

 

SRS-4

< SERVICE INFORMATION >

DTC INDEX

B1074-B1089

INFOID:0000000001524149

B1106-B1120

INFOID:0000000001524150

DTC

Items (CONSULT screen terms)

Reference

B1074

DIAGNOSIS SENSOR UNIT

SRS-24, "Trouble Diagnosis with CONSULT-III"

B1075

B1076

B1077

B1078

B1079

B1081

PRE-TEN FRONT RH

B1082

B1083

B1084

B1086

PRE-TEN FRONT LH

B1087

B1088

B1089

DTC

Items (CONSULT screen terms)

Reference

B1106

DIAGNOSIS SENSOR UNIT

SRS-24, "Trouble Diagnosis with CONSULT-III"

B1107

B1108

B1109

B1110

B1111

B1113

SATELLITE SENS RH

B1114

B1115

B1118

SATELLITE SENS LH

B1119

B1120

DTC INDEX

SRS-5

< SERVICE INFORMATION >

C

D

E

F

G

I

J

K

L

M

A

B

SRS

N

O

P

B1122-B1137

INFOID:0000000001524151

B1138-B1153

INFOID:0000000001524152

B1202-B1210

INFOID:0000000001524153

DTC

Items (CONSULT screen terms)

Reference

B1122

DIAGNOSIS SENSOR UNIT

SRS-24, "Trouble Diagnosis with CONSULT-III"

B1123

B1124

B1125

B1126

B1127

B1129

SIDE MODULE RH

B1130

B1131

B1132

B1134

SIDE MODULE LH

B1135

B1136

B1137

DTC

Items (CONSULT screen terms)

Reference

B1138

DIAGNOSIS SENSOR UNIT

SRS-24, "Trouble Diagnosis with CONSULT-III"

B1139

B1140

B1141

B1142

B1143

B1145

CURTAIN MODULE RH

B1146

B1147

B1148

B1150

CURTAIN MODULE LH

B1151

B1152

B1153

DTC

Items (CONSULT screen terms)

Reference

B1202

DIAGNOSIS SENSOR UNIT

SRS-24, "Trouble Diagnosis with CONSULT-III"

B1203

B1204

B1205

B1206

B1207

SRS-6

< SERVICE INFORMATION >

DTC INDEX

B1209

FRONTAL COLLISION

SRS-47, "For Frontal Collision"

B1210

SIDE COLLISION

SRS-48, "For Side Collision"

DTC

Items (CONSULT screen terms)

Reference

PRECAUTIONS

SRS-7

< SERVICE INFORMATION >

C

D

E

F

G

I

J

K

L

M

A

B

SRS

N

O

P

PRECAUTIONS

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT 
PRE-TENSIONER"

INFOID:0000000001612877

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SUPPLEMENTAL RESTRAINT SYS-
TEM” and “SEAT BELTS” of this Service Manual.

WARNING:

• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.

• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SUPPLEMENTAL RESTRAINT SYSTEM”.

• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.

Precaution for SRS "AIR BAG" and "SEAT BELT PRE-TENSIONER" Service

INFOID:0000000001327741

• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 min-

utes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-
tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have
passed.

• Diagnosis sensor unit must always be installed with their arrow marks “

” pointing towards the front of the

vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before installa-
tion and replace as required.

• The spiral cable must be aligned with the neutral position since its rotations are limited. Do not turn steering

wheel and column after removal of steering gear.

• Handle air bag module carefully. Always place driver and front passenger air bag modules with the pad side

facing upward and seat mounted front side air bag module standing with the stud bolt side facing down.

• Conduct self-diagnosis to check entire SRS for proper function after replacing any components.
• After air bag inflates, the front instrument panel assembly should be replaced if damaged.
• Always replace instrument panel pad following front passenger air bag deployment.
• Disposal, recycling, and transportation of air bag modules and seat belt pre-tensioners should be performed

in compliance with applicable federal, state and local laws and regulations.

Occupant Classification System Precaution

INFOID:0000000001327742

Replace occupant classification system control unit and passenger front seat cushion as an assembly.
Refer to Refer to Service Manual .

 

 

 

 

 

 

 

Content   ..  934  935  936  937   ..