|
|
AT-236 < SERVICE INFORMATION > ON-VEHICLE SERVICE 14. Disconnect revolution sensor connector. CAUTION: Be careful not to damage connector 15. Straighten terminal clip to free revolution sensor harness. 16. Remove revolution sensor from transmission case. CAUTION: • Do not subject it to impact by dropping or hitting it. edge magnetic area. • Do not place in an area affected by magnetism. INSTALLATION CAUTION: After completing installation, check A/T position, A/T fluid leakage and A/F fluid level. Refer to . 1. Install revolution sensor in transmission case, and then tighten CAUTION: • Do not subject it to impact by dropping or hitting it. edge magnetic area. • Do not place in an area affected by magnetism. SCIA7524E SCIA7525E SCIA3997E SCIA3997E |