Infiniti FX35 / FX45. Manual - part 4

 

  Index      Infiniti     Infiniti FX35 / FX45 (S50) - service repair manual 2008 year

 

Search            

 

 

 

 

 

 

 

  

 

Content   ..  1  2  3  4  5  ..

 

 

Infiniti FX35 / FX45. Manual - part 4

 

 

ACS-10

< SERVICE INFORMATION >

[ICC]

DESCRIPTION

Switch Operation

INFOID:0000000001328809

The system is operated by MAIN switch and four control switches, all mounted on the steering wheel.

ICC System Display

INFOID:0000000001328810

No.

Switch name

Description

1

RESUME/ACCELERATE switch

Resumes set speed or increases speed incrementally.

2

SET/COAST switch

Sets desired cruise speed, reduces speed incrementally.

3

CANCEL switch

Deactivates system without erasing set speed.

4

MAIN switch

Master switch to activate the system

5

DISTANCE switch

Changes the following distance from: Long, Middle, Short.

SKIB8558E

SKIA6177E

No.

Display items

Description

1

Set vehicle speed indicator

Indicates the set vehicle speed.
• For CANADA models: km/h
• For US models: MPH

2

Vehicle ahead detection indicator

Indicates whether it detects a vehicle ahead.

3

Set distance indicator

Display the selected distance between vehicles set with the DISTANCE switch.

4

Own vehicle indicator

Indicates the base vehicle.

5

MAIN switch indicator lamp (Green)

Indicates that the MAIN switch is ON.

6

Intelligent cruise control system warning lamp 
(Orange)

The light comes on if there is a malfunction in the ICC system.

7

SET switch indicator lamp

Indicates that the conventional cruise control mode is controlled.

ACTION TEST

ACS-11

< SERVICE INFORMATION >

[ICC]

C

D

E

F

G

H

I

J

L

M

A

B

ACS

N

O

P

ACTION TEST

ICC System Running Test

INFOID:0000000001328811

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE 

Set Checking

1.

Press the MAIN switch for less than 1.5 seconds.

2.

Drive the vehicle between 40 km/h (25 MPH) and 144 km/h (90 MPH).

3.

Push the SET/COAST switch.

4.

Confirm that the desired speed is set as hand is released from the SET/COAST switch.

NOTE:
• When there is no vehicle ahead, drive at the set speed steadily.
• When there is a vehicle ahead, control to maintain distance from the vehicle ahead, watching its speed.
• The set vehicle speed is displayed on the ICC system indicator in the combination meter.

Check For Increase Of Cruising Speed

1.

Set vehicle-to-vehicle distance control mode at desired speed.

2.

Check if the set speed increases by 1 km/h (1 MPH) as RESUME/ACCELERATE switch is pushed.

NOTE:
The maximum set speed of the vehicle-to-vehicle distance control mode is 144 km/h (90 MPH).

Check For Decrease Of Cruising Speed

1.

Set vehicle-to-vehicle distance control mode at desired speed.

2.

Check if the set speed decreases by 1 km/h (1 MPH) as SET/COAST switch is pushed.

NOTE:
• Vehicle-to-vehicle distance control mode is automatically turned off when the driving speed lowers to 32 km/

h (20 MPH) due to the deceleration of the vehicle ahead.

• The minimum set speed of the vehicle-to-vehicle distance control mode is 40 km/h (25 MPH).

Check For Cancellation Of Vehicle-To-Vehicle Distance Control Mode (Normal Driving Condition) In The Following
Cases:

• When the brake pedal is depressed after the system is turned ON.
• When the selector lever is shifted to the “N” (Neutral) position.
• When the MAIN switch is turned OFF.
• When CANCEL switch is operated.

Check For Restoring Speed That Is Set By Vehicle-To-Vehicle Distance Control Mode Before Cancellation

1.

Cancel the system by depressing the foot brake. Then, check that the speed before cancellation is
restored when pressing RESUME/ACCELERATE switch with 40 km/h (25 MPH) or above.

2.

Cancel the system by shifting the selector lever to “N” position. Then, check if the speed set before the
cancellation is restored when RESUME/ACCELERATE switch is pushed up.

3.

Check if the speed previously set is restored when RESUME/ACCELERATE switch is operated with driv-
ing 40 km/h (25 MPH), after canceling vehicle-to-vehicle distance control mode by operating the CANCEL
switch.

Check For MAIN Switch

1.

Start engine. Then, check if the following operations are per-
formed correctly.

2.

Vehicle-to-vehicle distance control mode is displayed in combi-
nation meter illuminates when MAIN switch is pressed “ON” for
less than 1.5 seconds and ready for operation. The illumination
goes off when MAIN switch is turned to OFF.

3.

“CRUISE” illumination and ICC system display go off when the
ignition switch is turned to OFF while MAIN switch is ON
(“CRUISE” illumination is ON and vehicle-to-vehicle distance
control mode is ready for operation).

SKIB8559E

ACS-12

< SERVICE INFORMATION >

[ICC]

ACTION TEST

Check For RESUME/ACCELERATE, SET/COAST, CANCEL Switches

1.

Check if RESUME/ACCELERATE, SET/COAST, CANCEL switches are operated smoothly.

2.

Check if buttons come up as hand is released from the buttons.

Check For Distance Switch

1.

Start engine.

2.

Press the MAIN switch for less than 1.5 seconds.

3.

Press the DISTANCE switch.

4.

 Check if the set distance indicator changes display in order of:
(Long)

→

(Middle)

→

(Short).

NOTE:
 The set distance indicator shows (Long) immediately after the engine starts.

CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE

Set Checking

1.

Press the MAIN switch for more than 1.5 seconds.

2.

Drive the vehicle between 40 km/h (25 MPH) and 144 km/h (90 MPH).

3.

Push down the SET/COAST switch.

4.

Confirm that the desired speed is set as hand is released from the SET/COAST switch.

NOTE:
ICC system display in the combination meter shows nothing.

Check For Increase Of Cruising Speed

1.

Set the conventional (fixed speed) cruise control mode at desired speed.

2.

Check if the set speed increases by 1.6 km/h (1 MPH) as RESUME/ACCELERATE switch is pushed up.

NOTE:
• If the RESUME/ACCELERATE switch is kept pushing up during cruise control driving, the vehicle speed

increases until the switch is released.

• The maximum set speed is 144 km/h (90 MPH).

Check For Decrease Of Cruising Speed

1.

Set the conventional (fixed speed) cruise control mode at desired speed.

2.

Check if the set speed decreases by 1.6 km/h (1 MPH) as SET/COAST switch is pushed down.

NOTE:
• Conventional (fixed speed) cruise control mode is automatically turned off when the driving speed lowers to

32 km/h (20 MPH).

• The minimum set speed is 40 km/h (25 MPH).

Check For Cancellation Of Conventional (Fixed Speed) Cruise Control Mode (Normal Driving Condition) In The Fol-
lowing Cases:

SKIB8746E

ACTION TEST

ACS-13

< SERVICE INFORMATION >

[ICC]

C

D

E

F

G

H

I

J

L

M

A

B

ACS

N

O

P

Refer to "Check For Cancellation Of Vehicle-To-Vehicle Distance Control Mode (Normal Driving Condition) In
The Following Cases:".

Check For Restoring Speed That Is Set By Conventional (Fixed Speed) Cruise Control Mode Before ICC Cancella-
tion

Refer to "Check For Restoring Speed That Is Set By Vehicle-To-Vehicle Distance Control Mode Before Can-
cellation".

Check For MAIN Switch

1.

Start engine. Then, check if the following operations are per-
formed correctly.

2.

“CRUISE” lamp illuminates and ICC system indicator goes off
when MAIN switch is pressed “ON” for more than 1.5 seconds,
and then ready for operation. The illumination goes off when
MAIN switch is turned to OFF.

3.

“CRUISE” illumination go off when the ignition switch is turned to
OFF while MAIN switch is ON.

Check For RESUME/ACCELERATE, SET/COAST, CANCEL Switches

1.

Check if RESUME/ACCELERATE, SET/COAST, CANCEL switches are operated smoothly.

2.

Check if buttons come up as hand is released from the buttons.

SKIB8560E

 

 

 

 

 

 

 

 

 

 

Content   ..  1  2  3  4  5  ..