|
|
ELECTRICAL LOAD SIGNAL EC-1101 < DTC/CIRCUIT DIAGNOSIS > [VK50VE] C D E F G H I J K L M A EC N P O ELECTRICAL LOAD SIGNAL Description INFOID:0000000005237604 The electrical load signal (Rear window defogger switch signal, headlamp switch signal, heater fan switch sig- Component Function Check INFOID:0000000005237605 1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION 1. Turn ignition switch ON. 2. Select “DATA MONITOR” mode with CONSULT-III. 3. Select “LOAD SIGNAL” and check indication under the following conditions. Is the inspection result normal? YES >> GO TO 2. NO >> Go to EC-1101, "Diagnosis Procedure" . 2. CHECK LIGHTING SWITCH FUNCTION Check “LOAD SIGNAL” indication under the following conditions. Is the inspection result normal? YES >> GO TO 3. NO >> Go to EC-1101, "Diagnosis Procedure" . 3. CHECK HEATER FAN CONTROL SWITCH FUNCTION Select “HEATER FAN SW” and check indication under the following conditions. Is the inspection result normal? YES >> INSPECTION END NO >> Go to EC-1101, "Diagnosis Procedure" . Diagnosis Procedure INFOID:0000000005237606 1. INSPECTION START Confirm the malfunctioning circuit (rear window defogger, headlamp or heater fan). Refer to . Which circuit is related to the incident? Rear window defogger>>GO TO 2. 2. CHECK REAR WINDOW DEFOGGER SYSTEM . Monitor item Condition Indication LOAD SIGNAL Rear window defogger switch ON ON OFF OFF Monitor item Condition Indication LOAD SIGNAL Lighting switch ON at 2nd position ON OFF OFF Monitor item Condition Indication HEATER FAN SW Heater fan control switch ON ON OFF OFF |