|
|
ECM EC-545 < ECU DIAGNOSIS INFORMATION > [VQ35HR] C D E F G H I J K L M A EC N P O *1: 1st trip DTC No. is the same as DTC No. *2: This number is prescribed by SAE J2012/ISO 15031-4. *3: In Diagnostic Test Mode II (Self-diagnostic results), this number is controlled by NISSAN. *4: The troubleshooting for this DTC needs CONSULT-III. *5: When the fail-safe operations for both self-diagnoses occur, the MIL illuminates. *6: SRT code will not be set if the self-diagnostic result is NG. *7: When the ECM is in the mode that displays SRT status, MIL may blink. For the details, refer to “How to Display SRT Status”. *8: When erasing this DTC, always use CONSULT-III or GST. How to Set SRT Code INFOID:0000000005237125 To set all SRT codes, self-diagnosis for the items indicated above must be performed one or more times. Each WITH CONSULT-III Perform corresponding DTC Confirmation Procedure one by one based on Performance Priority in the table WITHOUT CONSULT-III The most efficient driving pattern in which SRT codes can be properly set is explained below. The driving pat- P1805 1805 BRAKE SW/CIRCUIT — 2 — P2100 2100 ETC MOT PWR-B1 — 1 × P2101 2101 ETC FNCTN/CIRC-B1 — 1 × P2103 2103 ETC MOT PWR — 1 × P2118 2118 ETC MOT-B1 — 1 × P2119 2119 ETC ACTR-B1 — 1 × P2122 2122 APP SEN 1/CIRC — 1 × P2123 2123 APP SEN 1/CIRC — 1 × P2127 2127 APP SEN 2/CIRC — 1 × P2128 2128 APP SEN 2/CIRC — 1 × P2132 2132 TP SEN 1/CIRC-B2 — 1 × P2133 2133 TP SEN 1/CIRC-B2 — 1 × P2135 2135 TP SENSOR-B1 — 1 × P2138 2138 APP SENSOR — 1 × P2713 2713 PRESS CONTROL SOL D — 2 × P2722 2722 PRESS CONTROL SOL E — 2 × P2731 2731 PRESS CONTROL SOL F — 2 × P2807 2807 PRESS CONTROL SOL G — 2 × P2A00 2A00 A/F SENSOR1 (B1) — 2 × P2A03 2A03 A/F SENSOR1 (B2) — 2 × DTC* 1 Items (CONSULT-III screen terms) SRT code Trip MIL Reference page CONSULT-III GST* 2 ECM* 3 |