|
|
CCS-492 < DTC/CIRCUIT DIAGNOSIS > [LDW & LDP] U0405 LDP) ICC CAM CAN CIR1 U0405 LDP) ICC CAM CAN CIR1 DTC Logic INFOID:0000000005502107 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. DTC ERASE Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III. >> GO TO 2. 2. DTC CONFIRMATION 1. Turn ignition switch ON and wait for 2 seconds or more. 2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III. Is the DTC “U0405” detected? YES >> Refer to CCS-492, "Diagnosis Procedure" NO >> Refer to GI-36, "Intermittent Incident" . Diagnosis Procedure INFOID:0000000005502108 1. PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT Perform ICC sensor integrated unit self-diagnosis with CONSULT-III. Is any DTC detected? YES >> GO TO 2. NO >> GO TO 4. 2. ICC SENSOR INTEGRATED UNIT TROUBLE DIAGNOSIS Perform trouble diagnosis of ICC sensor integrated unit. Refer to >> GO TO 3. 3. ERASE DTC Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III. Is the DTC “U0405” erased? YES >> INSPECTION END NO >> Replace ABS actuator and electric unit (control unit). 4. PROVISIONAL REPLACEMENT OF ICC SENSOR INTEGRATED UNIT Remove ICC sensor integrated unit. Install a normal ICC sensor integrated unit. >> GO TO 5. 5. ERASE DTC Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III. Is the DTC “U0405” erased? YES >> Replace ICC sensor integrated unit. NO >> Replace ABS actuator and electric unit (control unit). DTC No. Trouble diagnosis name DTC detecting condition DTC erase conditions Possible cause U0405 LDP) ICC CAM CAN ABS actuator and electric unit (control Erase DTC with CON- • ICC sensor integrated unit unit (control unit) |