|
|
CCS-404 < ECU DIAGNOSIS INFORMATION > [FCW] ICC SENSOR INTEGRATED UNIT SET VHCL SPD While driving When vehicle speed is set Displays the set vehicle speed. BUZZER O/P Engine running When the buzzer output signal is output On When the buzzer output signal is not output Off THRTL SENSOR NOTE: 0.0 ENGINE RPM Engine running Equivalent to ta- chometer read- ing WIPER SW Ignition switch ON Wiper not operating Off Wiper LO operation Low Wiper HI operation High YAW RATE NOTE: 0.0 BA WARNING Engine running IBA OFF indicator lamp ON On IBA OFF indicator lamp OFF Off FUNC ITEM Ignition switch ON FUNC1 LDP SELECT Ignition switch ON When the LDP system setting is ON On When the LDP system setting is OFF Off DCA SELECT Ignition switch ON When the DCA system setting is ON On When the DCA system setting is OFF Off RELEASE SW NO Engine running When brake pedal is depressed On When brake pedal is not depressed Off RELEASE SW NC Engine running When brake pedal is depressed Off When brake pedal is not depressed On STP LMP DRIVE Drive the vehicle and activate When ICC brake hold relay is activated On When the ICC brake hold relay is not activated Off PRESS SENS Engine running When brake pedal is not depressed 0.0 When brake pedal is depressed Brake fluid pres- sure value D RANGE SW Engine running When the selector lever is in “D”, “DS” position or man- On When the selector lever is in any position other than “D”, Off NP RANGE SW Engine running When the selector lever is in “N”, “P” position On When the selector lever is in any position other than “N”, Off PKB SW Ignition switch ON When the parking brake is applied On When the parking brake is released Off PWR SUP MONI Engine running Power supply voltage value of ICC sensor inte- grated unit VHCL SPD AT While driving Value of A/T ve- hicle speed sen- sor signal Monitor item Condition Value/Status |