Content .. 301 302 303 304 ..

Infiniti FX35, FX50 (S51). Manual - part 303

CCS-32

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE FUNCTION

ICC System Display (On The Information Display)

CANCEL switch

RESUME/ACCELERATE switch

SET/COAST switch

DISTANCE switch

MAIN switch

No.

Switch name

Description

CANCEL switch

Deactivates the system without erasing the set speed.

RESUME/ACCELERATE switch

Resumes set speed or increases speed incrementally.
• Push and hold the switch to increase the set speed by 5 km/h (5 MPH).
• Push then quickly release the switch to increase the set speed by 1 km/h (1 MPH).

SET/COAST switch

Sets desired cruise speed or reduces speed incrementally.
• Push and hold the switch to decrease the set speed by 5 km/h (5 MPH).
• Push then quickly release the switch to decrease the set speed by 1 km/h (1 MPH).
NOTE:
The minimum set speed is 32 km/h (20 MPH).

DISTANCE switch

Changes the following distance from: Long, Middle, Short.

MAIN switch

Master switch to activate the system (Press for less than 1.5 seconds).

JSOIA0150ZZ

JSOIA0011ZZ

No.

Display item

Description

ICC system warning lamp

Indicates that a malfunction occurs in the ICC system.

MAIN switch indicator

Indicates that the MAIN switch is ON (ICC system ON).

Vehicle ahead detection indicator

Indicates whether it detects a vehicle ahead.

Set distance indicator

Indicates the selected distance between vehicles set with the DISTANCE switch.

Own vehicle indicator

Indicates the own vehicle.

Set vehicle speed indicator

• Indicates the set vehicle speed.
• Indicates 32 km/h (20 MPH) when setting less than 32 km/h (20 MPH).

CCS

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE FUNCTION

CCS-33

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

System Control Condition Display

Quickly push (less than 1.5 seconds) and release the MAIN switch ON.
The MAIN switch indicator (cruise indicator), set distance indicator, own vehicle indicator, and set vehicle
speed indicator come on and ICC system is set to a standby state.

Condition

Display on ICC system display

Standby mode

Control mode

Without a vehicle
ahead

Set vehicle distance (Long)

Set vehicle distance (Middle)

Set vehicle distance (Short)

When the vehicle speed exceeds the set speed

JPOIA0141ZZ

JPOIA0142ZZ

JPOIA0143ZZ

JPOIA0144ZZ

JPOIA0145ZZ

CCS-34

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE FUNCTION

NOTE:
The display of the DCA system is given priority when the DCA system is ON in a standby mode. (The set vehi-
cle speed indicator, set distance indicator, and own vehicle indicator are not displayed). Refer to

CCS-192,

"System Description"

Approach Warning Display

If own vehicle comes closer to a vehicle ahead due to rapid deceleration of that vehicle or if another vehicle
cuts in, the system warns the driver with the chime and ICC system display. Decelerate by depressing the
brake pedal to maintain a safe vehicle distance if:
• The chime sounds.
• The vehicle ahead detection indicator and set distance indicator blink.
The warning chime may not sound in some cases when there is a short distance between vehicles. Some
examples are:
• When the vehicles are traveling at the same speed and the distance between vehicles is not changing.
• When the vehicle ahead is traveling faster and the distance between vehicles is increasing.
• When a vehicle cuts in at near own vehicle.
The warning chime will not sound when own vehicle approaches vehicles that are parked or moving slowly.
The warning chime will not sound when the accelerator pedal is depressed, overriding the system.
The approach warning chime may sound and the system display may blink when the ICC sensor detects some
reflectors which are fitted on vehicles in other lanes or on the side of the road.
This may cause the ICC system to decelerate or accelerate the vehicle.
The ICC sensor may detect these reflectors when the vehicle is driven on winding roads, hilly roads or when
entering or exiting a curve.
The ICC sensor may also detect reflectors on narrow roads or in road construction zones.
In these cases driver will have to manually control the proper distance ahead of own vehicle.
Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving position in the
lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage).

Control mode

With a vehicle
ahead

Set vehicle distance (Long)

Set vehicle distance (Middle)

Set vehicle distance (Short)

When the vehicle speed exceeds the set speed

Condition

Display on ICC system display

JPOIA0146ZZ

JPOIA0147ZZ

JPOIA0148ZZ

JPOIA0149ZZ

CCS

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE FUNCTION

CCS-35

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

Warning Lamp and Automatic Cancellation Display

NOTE:

Condition

Display on ICC system display

When own vehicle comes closer to the vehicle ahead and it is judged that the distance between
the vehicles is not sufficient

JPOIA0150ZZ

Condition

Description

Display on ICC system display

Warning
display

• When the VDC is turned OFF
• When the VDC or ABS (in-

cluding the TCS) operates

• When a wheel slips
• When the snow mode switch

is turned ON

• When driving into a strong

light (i.e., sunlight)

A chime sounds and the control is automatically
canceled.
NOTE:
When the conditions listed above are no longer
present, turn the system OFF using the MAIN
switch.
Turn the ICC system back on to use the system.

When the sensor window is
dirty, making it impossible to de-
tect a vehicle ahead.

A chime sounds and the control is automatically
canceled.
NOTE:
Park the vehicle in a safe place, turn the engine
OFF.
Clean the sensor window with a soft cloth and
then perform the settings again.

When the ICC system is mal-
functioning

A chime sounds and the control is automatically
canceled.
NOTE:
Turn the engine OFF and restart engine. If there
is no malfunction, it is possible to set the system.

Automatic
cancella-
tion display

• When brake pedal is de-

pressed

• When CANCEL switch is

pressed

• When a vehicle ahead is not

detected below the speed of
24 km/h (15 MPH)

• When the system judges the

vehicle is at standstill

• When the selector lever is not

in “D”, ”DS” position or manu-
al mode

• When the front wipers are op-

erating at LO or HI
(If the vehicle is equipped
with a rain sensing auto-wip-
er, the system may cancel
when the wipers are set to
INT)

• When the parking brake are

applied

A chime sounds and the control is automatically
canceled.
NOTE:
• The system will be in a standby, after the control

is automatically canceled.

• A chime sounds when the control is automati-

cally canceled, except when brake pedal is de-
pressed or when CANCEL switch is pressed.

JPOIA0151ZZ

JPOIA0152ZZ

JPOIA0153ZZ

JPOIA0154ZZ

Content .. 301 302 303 304 ..