|
|
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) BRC-111 < ECU DIAGNOSIS INFORMATION > [VDC/TCS/ABS] C D E G H I J K L M A B BRC N O P NOTE: • 1: Confirm tire pressure is normal. • 2: A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking. • 3: On and off timing for warning lamp and indicator lamp. . - Brake warning lamp: Refer to - VDC OFF indicator lamp: Refer to - SLIP indicator lamp: Refer to • 4: With LDP models. • 5:The item displayed on “SPECIFIC DATA MONITOR” in “Specific Function”. LDP) TURN SIGNAL Turn signal operation Turn signal is OFF. Off Turn signal lamp RH is blinking. LH Turn signal lamp LH is blinking. RH Turn signal lamp LH and RH are blinking. LH&RH LDP)YAW ORDER Calculated target yaw moment status LDP is controlling to right side deviation Negative value LDP is controlling to left side deviation Positive value LDP) WARN REQ Lane departure warning request status Lane departure warning is operating. On Lane departure warning is not operating. Off LDP)WARN CONTROL Warning main controller status When using LDP On When using LDW Off LDP)REDY SIGNAL LDP ready status LDP control is ready. On LDP control is not ready. Off LDP)STATUS SIGNAL LDP control status LDP control is standby. STANDBY Lane departure warning is operating. WARN LDP control is stopped. MASK LDP control is OFF. Off LDP)CAMERA LOST Lane marker detected condition Both side lane markers are detected. Detect Deviate side lane marker is lost. Deviate Both side lane markers are lost. Both LDP)LANE UNCLEAR Lane marker condition Lane marker is unclear. On Lane marker is clear. Off Monitor item Display content Data monitor Condition Reference value in normal operation |