|
|
AV POWER SUPPLY AND GROUND CIRCUIT AV-513 < DTC/CIRCUIT DIAGNOSIS > [NAVIGATION (TWIN MONITOR)] C D E F G H I J K L M B A O P Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between BOSE amp. and fuse. 3. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect BOSE amp. connector. 3. Check continuity between BOSE amp. harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector. AROUND VIEW MONITOR CONTROL UNIT AROUND VIEW MONITOR CONTROL UNIT : Diagnosis Procedure INFOID:0000000005475125 1. CHECK FUSE Check for blown fuses. Is inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate cause of malfunction before installing new fuse. 2. CHECK POWER SUPPLY CIRCUITS Check voltage between around view monitor control unit harness connector and ground. Is inspection result normal? YES >> GO TO 3. NO >> Check harness between around view monitor control unit and fuse. 3. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect around view monitor control unit connector. 3. Check continuity between around view monitor control unit harness connector and ground. Is inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector. SONAR CONTROL UNIT (WITH AROUND VIEW MONITOR) SONAR CONTROL UNIT (WITH AROUND VIEW MONITOR) : Diagnosis Procedure INFOID:0000000005475126 1. CHECK FUSE Signal name Connector No. Terminal No. Ignition switch position Continuity Ground B42 12 OFF Existed Power source Fuse No. Battery 34 Ignition switch ACC 19 Signal name Connector No. Terminal No. Ignition switch position Value (Approx.) Battery power supply B46 2 OFF Battery voltage ACC power supply B46 4 ACC Battery voltage Signal name Connector No. Terminal No. Ignition switch position Continuity Ground B46 1 OFF Existed |