Content .. 1796 1797 1798 1799 ..
Infiniti FX35, FX50 (S51). Manual - part 1798
STARTER MOTOR
STR-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
VK50VE : Removal and Installation
INFOID:0000000005245539
REMOVAL
1.
Disconnect the battery cable from the negative terminal.
2.
Remove engine cover, using power tools. Refer to
.
3.
Remove intake manifold. Refer to
4.
Remove “B” terminal nut.
5.
Disconnect “S” connector.
6.
Remove starter motor mounting bolts using power tools.
7.
Remove starter motor upward from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to tighten “B” terminal nut carefully.
VK50VE : Inspection
INFOID:0000000005245540
INSPECTION AFTER DISASSEMBLY
Pinion/Clutch Check
1.
Inspect pinion teeth.
• Replace pinion if teeth are worn or damaged. (Also check condition of ring gear teeth.)
2.
Inspect reduction gear teeth.
• Replace reduction gear if teeth are worn or damaged. (Also check condition of armature shaft gear
teeth.)
3.
Check to see if pinion locks in one direction and rotates smoothly in the opposite direction.
• If it locks or rotates in both directions, or unusual resistance is evident, replace.
13. Rear cover
14. Through bolt
15. Packing
16. Ball
17. Planetary gear
18. Gear shaft
19. Dust cover kit
20. Shift lever
: High-temperature grease point
Refer to