|
|
Content .. 1659 1660 1661 1662 ..
B2556 PUSH-BUTTON IGNITION SWITCH SEC-57 < DTC/CIRCUIT DIAGNOSIS > [INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B SEC N O P YES >> Replace BCM. Refer to BCS-83, "Removal and Installation" NO >> Repair or replace harness. 3. CHECK PUSH-BUTTON IGNITION SWITCH GROUND CIRCUIT Check continuity between push-button ignition switch harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK PUSH-BUTTON IGNITION SWITCH SEC-57, "Component Inspection" . Is the inspection result normal? YES >> GO TO 5. NO >> Replace push-button ignition switch. Refer to SEC-220, "Removal and Installation" . 5. CHECK INTERMITTENT INCIDENT GI-36, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000005249465 1. CHECK PUSH-BUTTON IGNITION SWITCH 1. Turn ignition switch OFF. 2. Disconnect push-button ignition switch connector. 3. Check continuity between push-button ignition switch terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace push-button ignition switch. Refer to SEC-220, "Removal and Installation" . Push-button ignition switch Ground Continuity Connector Terminal M50 1 Existed Push-button ignition switch Condition Continuity Terminals 1 4 Pressed Existed Not pressed Not existed |