Infiniti FX35, FX50 (S51). Manual - part 150

SYSTEM

AV-373

< SYSTEM DESCRIPTION >

[NAVIGATION (TWIN MONITOR)]

• Audio signal (satellite radio) is received by satellite antenna, and it is input to AV control unit. AV control unit

outputs audio signal to BOSE amp. The signal is also outputted from BOSE amp. to both woofer and each
speaker.

CD Mode

• CD function is built into AV control unit.
• AV control unit outputs audio signal to BOSE amp., and BOSE amp. outputs to each speaker when CD is

inserted to AV control unit.

Bluetooth

™

Audio Mode

• Bluetooth

™

audio function is built into AV control unit.

• Bluetooth

™

audio can play music data in the portable audio by means of Bluetooth

™

communications

between the portable audio and the AV control unit.

• AV control unit outputs audio signal to BOSE amp., and BOSE amp. outputs to each speaker.

Music Box Mode

• Music CD data is stored on HDD that is built into AV control unit, and it can be played.
• AV control unit outputs music (sound signal) that is stored on HDD to BOSE amp., and BOSE amp. outputs

to each speaker.

Driver's Audio Stage

• Driver's Audio Stage controls the speaker's output characteristic by BOSE amp. so that the driver's seat is to

be the center of sounds.

• ON/OFF signals of Driver's Audio Stage are transmitted from AV control unit to BOSE amp. using mode

change signal.

DVD PLAY FUNCTION

• DVD is played by inserting DVD into the AV control unit.
• DVD image signals are transmitted to the front display unit and video distributor, and DVD sound signals are

transmitted to BOSE amp. and rear display unit.

• DVD image signals are transmitted to rear display unit via video distributor.

MOBILE ENTERTAINMENT SYSTEM

The passengers can enjoy watching DVD in the rear seat with the rear display unit. They can also listen to a
DVD and AUX in the rear seat independently by cordless headphones.

Operating Signal

The mobile entertainment system can be controlled by the rear seat remote controller.
It receives the operation signal of the rear seat remote controller by the remote control receiver and rear dis-
play unit, and then transmits it to the video distributor.

Headphone Sound

• Headphone sound signals are transmitted to rear display unit via AV control unit.
• Headphone sound signals are transmitted to wireless communication between rear display unit and head-

phone.

Screen Rear Display

• Switching of display is performed with serial communication between rear display unit and video distributor.
• The rear display unit receives the DVD/AUX/USB (video data) image signal and RGB image signal from the

video distributor.

Screen Front Display

• Switching of display is performed with serial communication between front display unit and AV control unit.
• The front display unit receives the DVD/AUX/USB (video data) image signal from the AV control unit.
• The front display unit receives the RGB image signal from the AV control unit.

HANDS-FREE PHONE FUNCTION

• AV control unit includes hands-free phone function.
• Hands-free communication can be operated by connecting using Bluetooth

™

communication with cellular

phone.

• Operation is performed by steering switch, and operating condition is indicated on display.
• Guide sound that is heard during operation is input from AV control unit to BOSE amp., and is output from

front speaker and center speaker.

When A Call Is Originated

AV-374

< SYSTEM DESCRIPTION >

[NAVIGATION (TWIN MONITOR)]

SYSTEM

Spoken voice sound output from the microphone (microphone signal) is input to AV control unit. AV control unit
outputs to cellular phone with Bluetooth

™

communication as a TEL voice signal. Voice sound is then heard at

the other party.

When Receiving A Call

Voice sound is input to own cellular phone from the other party. TEL voice signal is output to door speaker, and
the signal is input to BOSE amp. via AV control unit by establishing Bluetooth

™

communication from cellular

phone.

AUXILIARY INPUT FUNCTION

• Image and sound can be output from an external device by connecting a device with auxiliary input jacks.
• AUX image signals are transmitted to the front display unit and video distributor via the AV control unit, and

AUX sound signals are transmitted to BOSE amp via AV control unit.

USB CONNECTION FUNCTION

• Connecting iPod

or USB memory allows the driver to play iPod

music files or USB memory-stored music

files, video data, and image viewer data.

• Sound signals of music files stored in iPod

or USB memory are transmitted from the USB connector to the

AV control unit. The AV control unit transmits the sound signals to the woofer and each speaker via BOSE
amp.

• Video signals and image viewer file signals are transmitted from the USB connector to the AV control unit.

The data and files are displayed on the front display unit screen.

• iPod

is recharged when connected to USB connector.

• Only files that meet the following conditions will be played.

NOTE:
• iPod

is a trademark of Apple inc., registered in the U.S. and other countries.

• Image signals cannot be received from iPod

• Use the enclosed USB harness when connecting iPod

to USB connector.

VOICE RECOGNITION FUNCTION

• Each operation of multi AV system can be performed by inputting sound to microphone.
• Start of sound recognition system can be performed by steering switch.

TOUCH PANEL SYSTEM

Each operation of multi AV system can be performed by directly touching a front display.

AROUND VIEW MONITOR FUNCTION

• This system is equipped with wide-angle high-resolution cameras on the front and rear of the vehicle and on

both right and left door mirrors. The images from front view, rear view, front-side view (RH side), and birds-
eye view that shows the view from the top of the vehicle are displayed to monitor the vehicle surroundings.

• Around view monitor control unit cuts out and expands the image received from each camera to create each

view.

• The sonar indicator is displayed on display (superimposed on the camera image) in combination with the

camera assistance sonar system to warm of the approach of an obstacle.

• In front view and rear view, the vehicle width, distance lines and predictive course lines are superimposed

and displayed. In front-side view, the vehicle distance guiding line and vehicle width guiding line are dis-
played.

• The Birds-Eye view converts the images from 4 cameras into the overhead view and displays the status of

the vehicle on display. The vehicle icon and sonar indicator that are displayed on the Birds-Eye view display
are rendered by around view monitor control unit.

Around View Monitor Screen

• Around view monitor combines and displays the travel direction view and “Birds-Eye view”, “Front-Side view”

and then it displays the sonar indicator on the “Birds-Eye view”, “Front-Side view”“Rear wide view” .

• AV control unit renders the “Change View” switch, view icon, warning message on display.

Music file

Video file

Image viewer file

File format

“MP3”, “WMA”, “AAC”, “M4A”

“DivX”, “MPEG4 (ASF)”

“JPEG”

File extension

“.mp3”, “.wma”, “.aac”, “.m4a”

“.divx”, “.afs”, “.avi”

“.jpg”, “.jpeg”

Maximum file size

2 GB

2 MB

SYSTEM

AV-375

< SYSTEM DESCRIPTION >

[NAVIGATION (TWIN MONITOR)]

Screen constitution

Operation Description

• Around view monitor operates by pressing the “CAMERA” switch of multifunction switch and shifting the

selector switch to the reverse position.

• When the selector lever is in any position other than the reverse position, the screen is switched to the

around view monitor by pressing the “CAMERA” switch.

• The screen is switched to the around view monitor by shifting the selector lever to the reverse position.
• In the around view monitor, Birds-Eye view, Front-side view and rear wide view (rear only) can be switched

by pressing the “CAMERA” switch.

• The around view monitor is cancelled 3 minutes after pressing the “CAMERA” switch, and then the screen

returns to the screen before displaying the around view monitor when selector lever is in a position other
than the reverse position.

• ON/OFF setting of sonar indicator display on the Front-Side view screen can be performed.
• In the Birds-Eye view, the invisible area is displayed on the image to specify the boundary of the 4 cameras.

The invisible area is displayed in yellow in the Birds-Eye view after turning the ignition switch ON.

• The sonar (both of buzzer and indicator) operates only when the camera screen is displayed.

NOTE:
The first, second, and third camera image displayed when switched to the camera image display depends
on the settings of “Camera View Priority”.

JSNIA2332GB

AV-376

< SYSTEM DESCRIPTION >

[NAVIGATION (TWIN MONITOR)]

SYSTEM

Around view monitor screen transition

FRONT VIEW

• The front view image is from the front camera.
• When the selector lever is in any position other than the reverse position, the front view is displayed by

pressing the “CAMERA” switch. It improves the visibility of obstacles in front of the vehicle and helps driving
by the images displayed from Birds-Eye view and Front-Side view.

• Display the vehicle width guiding line and vehicle distance guiding line in front view and display the predic-

tive course line according to the steering angle.

• If the steering angle is within approximately 90 degrees, the predictive course lines on the left/right side are

displayed. If the steering angle is exceeding approximately 90 degrees, only the predictive course line on the
outside (in the opposite side of steering direction) is displayed.

• AV control unit is connected to the steering angle sensor and receives the steering angle signal via CAN

communication. AV control unit is transmits steering angle signal to around view monitor control unit via AV
communication.

• Around view monitor control unit controls the direction and distance of the predictive course line according to

the sensor signal from steering angle sensor.

JSNIA2381GB

Content .. 148 149 150 151 ..