Infiniti FX35, FX50 (S51). Manual - part 139

 

  Index      Infiniti     Infiniti FX35, FX50 (S51) - service repair manual 2010 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  137  138  139  140   ..

 

 

Infiniti FX35, FX50 (S51). Manual - part 139

 

 

AV

NORMAL OPERATING CONDITION

AV-329

< SYMPTOM DIAGNOSIS >

[NAVIGATION (SINGLE MONITOR)]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise from trains and other
sources, is not a malfunction.

NOTE:

• Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking

the signal.

• Multi-path noise: This noise results from a time difference between the broadcast waves directly from the station arriving at the

antenna and the waves reflected by mountains or buildings.

RELATED TO DVD 

Symptom

Cause and Counter measure

Cannot play

Check if the CD was inserted correctly.

Check if the CD is scratched or dirty.

Check if there is condensation inside the player, and if there is, wait until the condensation is gone 
(about 1 hour) before using the player.

If there is a temperature increase error, the player will play correctly after it returns to the normal 
temperature. 

If there is a mixture of music CD files (CD-DA data) and MP3/WMA/AAC/M4A files on a CD, only 
the music CD files (CD-DA data) will be played. 

Files with extensions other than “.MP3”, “.WMA”, “AAC”, “.M4A”, “.mp3”, “.wma”, “.aac” or “.m4a” 
cannot be played. In addition, the character codes and number of characters for folder names and 
file names should be in compliance with the specifications.

Check if the disc or the file is generated in an irregular format, This may occur depending on the 
variation or the setting of MP3/WMA/AAC/M4A writing applications or other text editing applica-
tions.

Check if the finalization process, such as session close and disc close, is done for the disc.

Check if the CD is protected by copyright.

Disks recorded in live file system format are not supported. (For Microsoft Windows Vista, check 
the settings.)

Poor sound quality

Check if the CD is scratched or dirty.

It takes a relatively long time before 
the music starts playing.

If there are many folder or file levels on the MP3/WMA/AAC/M4A CD, or if it is a multisession disc, 
some time may be required before the music starts playing.

Music cuts off or skips

The writing software and hardware combination might not match, or the writing speed, writing 
depth, writing width might not match the specifications. Try using the slowest writing speed. 

Skipping with high bit rate files

Skipping may occur with large quantities if data such as for high bit rate data.

Move immediately to the next song 
when playing

When a non-MP3/WMA/AAC/M4A file has been given an extension of “.MP3”, “.WMA”, “AAC”, 
“.M4A” “.mp3”, “.wma”, “.aac” or “.m4a”, or when play is prohibited by copyright protection, the 
player will skip to the next song.

The songs do not play back in the 
desired order.

The playback order is the order in which the files were written by the software, so the files might 
not play in the desired order.

Symptom

Possible cause

Possible solution

Not working as operated

Some operations may be rejected or may not function 
as intended because of the manufacturer's intent, de-
pending on DVD. 

This is not a malfunction.

Operation not accepted

If a requested operation is prohibited, then a message 
is displayed on the screen. (Message display depends 
on DVD.)

This is not a malfunction.

AV-330

< SYMPTOM DIAGNOSIS >

[NAVIGATION (SINGLE MONITOR)]

NORMAL OPERATING CONDITION

RELATED TO VEHICLE ICON

DVD can not be played

Check that the DVD is inserted in the right place.

Upturn the DVD (facing the title upward). 

Check that there is no condensation inside the player.

Wait until the condensation evaporates (approx-
imately one hour).

DVD menu is displayed.

Select item to touch “ENTER”.

Insertion of a DVD with a different region code.

DVDs with a different region code can not be 
played. Check DVD.

Some DVD softwares may not be played because not 
all DVD softwares fully comply in the standard.

This is not a malfunction.

Interruption during play-
back or flicker in the dis-
play

Check that the DVD has no scratches and dirt.

Errors may not be corrected depending on the 
size of scratches.

Wipe and clean the dirt on the disc.

Subtitles not shown

Subtitle setting is OFF.

Set subtitle.

Subtitle is not included in the software.

Check DVD.

Not played in set language

If a language is not included in the DVD, then the DVD 
is played in a recommended language.

Check DVD.

Not played with set subtitle 

If a set subtitle is not included in the DVD, then the 
DVD is played with a recommended subtitle.

Check DVD.

Angle unchangeable

Plural angles are not recorded in the software. 

Check if the DVD is multi

angle capable.

Unusual screen display

Display mode to the output aspect ratio for the DVD 
software is inappropriate.

Switch to the appropriate display mode.

Distortion in picture

In the process of fast

forward or fast

reverse.

This is not a malfunction.

Low sound quality

Check that the DVD has no scratches and dirt.

Wipe and clean the dirt on the disc.

Subtitle and language not 
selectable (not played with 
set subtitle or in set lan-
guage)

The DVD is not multilanguage

capable. 

The inclusion of the number of languages de-
pends on DVD. Languages may be selectable on 
the Menu screen. Check DVD.

The DVD has a priority language or setting.

If the DVD has a priority language or settings, 
then settings changed with this device are not re-
flected.

Playback time is indicated, 
but no sound comes out. 

Playback of Mix mode Truck 1. (Mix mode: Format in-
cluding Truck 1 with data other than music and Trucks 
from Truck 2 with music data.) 

Play music data included in trucks from Truck 2.

Symptom

Possible cause

Possible solution

Symptom

Possible cause

Possible solution

Names of roads differ between Plan 

View and Birdview

.

This is because the quantity of the displayed in-
formation is reduced so that the screen does 
not become too crowded. There is also a 
chance that names of the roads may be dis-
played multiple times, and the names appear-
ing on the screen may be different because of 
a processing procedure.

This is not a malfunction.

The vehicle icon is not displayed in 
the correct position.

The vehicle was transported after the ignition 
switch was pressed off, for example, by a ferry 
or car transporter.

Drive the vehicle for a while on a road where 
GPS signals can be received.

The position and direction of the vehicle icon 
may be incorrect depending on the driving en-
vironments and the levels of positioning accu-
racy of the navigation system.

This is not a malfunction. Drive the vehicle for 
a while to automatically correct the position 
and direction of the vehicle icon.

When the vehicle is traveling on a 
new road, the vehicle icon is located 
on another road nearby.

Because the new road is not stored in the map 
data, the system automatically places the vehi-
cle icon on the nearest road available.

Updated road information will be included in 
the next version of the map data.

AV

NORMAL OPERATING CONDITION

AV-331

< SYMPTOM DIAGNOSIS >

[NAVIGATION (SINGLE MONITOR)]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

RELATED TO ROUTE CALCULATION AND VISUAL GUIDANCE

The screen does not switch to the 
night screen even after turning on 
the headlights.

The daytime screen was set the last time the 
headlights were turned on.

Set the screen to the night screen mode using 
<Day/Night> when you turn on the headlights.

The map does not scroll even when 
the vehicle is moving.

The current location map screen is not dis-
played.

Press “MAP”.

The vehicle icon is not displayed. 

The current location map screen is not dis-
played.

Press “MAP”.

The location of the vehicle icon is 
misaligned from the actual position.

When using tire chains or replacing the tires, 
speed calculations based on the speed sensor 
may be incorrect.

Drive the vehicle for a while [at approximately 
30 km/h (19 MPH) for about 30 minutes] to 
automatically correct the vehicle icon posi-
tion.
If this does not correct the vehicle icon posi-
tion, contact an INFINITI dealer.

The map data has a mistake or is incomplete 
(the vehicle icon position is always misaligned 
in the same area).

Updated road information will be included in 
the next version of the map data.

Symptom

Possible cause

Possible solution

Symptom

Possible cause

Possible solution

Waypoints are not included in 
the auto reroute calculation.

Waypoints that you have already passed are not included in 
the auto reroute calculation.

If you want to go to that waypoint 
again, you need to edit the route.

Route information is not dis-
played.

Route calculation has not yet been performed.

Set the destination and perform route 
calculation.

You are not driving on the suggested route.

Drive on the suggested route.

Route guidance is set to off.

Turn on route guidance.

Route information is not provided for certain types of roads 
(roads displayed in gray).

This is not a malfunction.

The auto reroute calculation (or 
detour calculation) suggests 
the same route as the one pre-
viously suggested.

Route calculations took priority conditions into consider-
ation, but the same route was calculated.

This is not a malfunction.

A waypoint cannot be added.

Five waypoints are already set on the route, including ones 
that you have already passed.

A maximum of 5 waypoints can be set 
on the route. If you want to go to 6 or 
more waypoints, perform route calcu-
lations multiple times as necessary.

The suggested route is not dis-
played.

Roads near the destination cannot be calculated.

Reset the destination to a main or or-
dinary road, and recalculate the route.

The starting point and destination are too close.

Set a more distant destination.

The starting point and destination are too far away.

Divide your trip by selecting one or two 
intermediate destinations, and per-
form route calculations multiple times.

There are time restricted roads (by the day of the week, by 
time) near the current vehicle location or destination.

Set [Use Time Restricted Roads] to 
off. 

The part of the route that you 
have already passed is deleted.

A route is managed by sections between waypoints. If you 
passed the first waypoint, the section between the starting 
point and the waypoint is deleted. (It may not be deleted de-
pending on the area.)

This is not a malfunction.

An indirect route is suggested.

If there are restrictions (such as one-way streets) on roads 
close to the starting point or destination, the system may 
suggest an indirect route.

Adjust the location of the starting of 
the starting point or destination.

The system may suggest an indirect route because route 
calculation does not take into consideration some areas 
such as narrow streets (gray roads.) 

Reset the destination to a main or or-
dinary road, and recalculate the route.

AV-332

< SYMPTOM DIAGNOSIS >

[NAVIGATION (SINGLE MONITOR)]

NORMAL OPERATING CONDITION

RELATED TO VOICE GUIDANCE

The landmark information does 
not correspond to the actual in-
formation.

This may be caused by insufficient or incorrect map data.

Updated information will be included 
in the next version of the data.

The suggested route does not 
exactly connect to the starting 
point, waypoints, or destina-
tion.

There is no data for route calculation closes to these loca-
tions.

Set the starting point, waypoints and 
destination on a main road, and per-
form route calculation. 

Symptom

Possible cause

Possible solution

Symptom

Possible cause

Possible solution

Voice guidance is not available

Voice guidance is only available at certain intersections 
marked with? In some case, voice guidance is not avail-
able even when the vehicle should make a turn.

This is not a malfunction.

The vehicle has deviated from the suggested route.

Go back to the suggested route or request 
route calculation again

Voice guide is set to off.

Turn on voice guidance.

Route guidance is set to off.

Turn on voice guidance.

The guidance contact does not 
correspond to the actual condi-
tion. 

The contact of voice guidance may vary, depending on 
the types of intersections at which turn are made.

Follow all traffic rules and regulations.

 

 

 

 

 

 

 

Content   ..  137  138  139  140   ..