|
|
Content .. 1073 1074 1075 1076 ..
EXT-50 < REMOVAL AND INSTALLATION > BACK DOOR FINISHER 3. Remove back door finisher upper fixing nuts (A). 4. Disconnect back door request switch harness connector (B). 5. Pull harness grommet (C) outwards from back door to release. 6. Remove back door finisher upper (1) fixing clips with remover CAUTION: • Apply protective tape (B) on the back door panel to pro- tect the painted surface from damage. • Never use an item as a remover tool that could damage back door panel. • Disengage the clips slowly and carefully. 7. Pull back door finisher upper to remove. 8. Remove door handle cover (1) fixing clips (A). 9. Remove door handle cover fixing pawls, and then remove door BACK DOOR FINISHER LOWER 1. With a remover tool (A) and cutter knife (B), take off double- CAUTION: • Apply protective tape (C) on the back door panel to pro- tect the painted surface from damage. • Never use an item as a remover tool that could damage back door panel. • Disengage the pawls slowly and carefully. 2. Pull and remove back door finisher lower. INSTALLATION Install in the reverse order of removal. CAUTION: • Remove double-faced adhesive tape remaining on back door with a double-faced adhesive tape remover, after removing back door finisher lower. • Never wash the vehicle within 24 hours after installing so as to keep adhesive. JMKIA2772ZZ : Clip JMKIA2218ZZ : Pawl JMKIA2763ZZ : Pawl JMKIA2764ZZ |