Content .. 1072 1073 1074 1075 ..
Infiniti FX35, FX50 (S51). Manual - part 1074
EXT-46
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE LOWER MOLDING
1.
With a remover tool (A) and cutter knife (B) and take off double-
faced adhesive tape, and then disengage front door outside
lower molding (1) fixing clips from rear end to front end.
CAUTION:
• Apply protective tape (C) on the door panel to protect the
painted surface from damage.
• Never use an item as a remover tool that could damage
door panel.
• Disengage the clips slowly and carefully.
• Never pull the front door outside lower molding.
2.
Remove front door outside lower molding.
REAR DOOR OUTSIDE LOWER MOLDING
1.
With a remover tool (A) and cutter knife (B), take off double-
faced adhesive tape, and then disengage rear door outside
lower molding (1) fixing clips from rear end to front end.
CAUTION:
• Apply protective tape (C) on the door panel to protect the
painted surface from damage.
• Never use an item as a remover tool that could damage
door panel.
• Disengage the clips slowly and carefully.
• Never pull the rear door outside lower molding.
2.
Remove rear door outside lower molding.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Always replace double-faced adhesive tape with a new one, if door outside lower molding is reused.
• Remove double-faced adhesive tape remaining on door panel and back of door outside lower mold-
ing with a double-faced adhesive tape remover, after removing door outside lower molding.
• When installing, visually check the door outside lower molding and the clips, then replace them with
new parts if they are damaged.
• When installing door outside lower molding, check that clips are securely fitted in door panel holes,
and then press them in.
• Never wash the vehicle within 24 hours after installing so as to keep adhesive.
: Clip
JMKIA2759ZZ
: Clip
JMKIA2760ZZ