Infiniti FX35, FX50 (S51). Manual - part 1070

 

  Index      Infiniti     Infiniti FX35, FX50 (S51) - service repair manual 2010 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1068  1069  1070  1071   ..

 

 

Infiniti FX35, FX50 (S51). Manual - part 1070

 

 

EXT-30

< REMOVAL AND INSTALLATION >

CENTER MUD GUARD

1.

Remove wind deflector (1) fixing clip (A) and nut (B), and then
remove wind deflector.

2.

Remove screw (A) of center mud guard (1) front end.

3.

Remove screws (A) of center mud guard (1) rear end.

4.

Remove bolts of center mud guard underside.

5.

Fully open front door and rear door.

6.

Remove clips from back side of center mud guard (1) with a
remover tool (A).

CAUTION:

• Apply protective tape (B) on the body to protect the

painted surface from damage.

• Never use an item as a remover tool that could damage

body panel.

• Disengage the clips slowly and carefully.
• Never pull the center mud guard strongly.

7.

Remove center mud guard from body side.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

• Always replace clips with a new one, if the center mud guard is reused.
• When installing center mud guard, check that clips are securely fitted in body panel holes, and then

press them in.

JMKIA2726ZZ

JMKIA2727ZZ

JMKIA2728ZZ

: Clip

JMKIA2729ZZ

FLOOR SIDE FAIRING

EXT-31

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

L

M

A

B

EXT

N

O

P

FLOOR SIDE FAIRING

Exploded View

INFOID:0000000005248871

Removal and Installation

INFOID:0000000005248872

REMOVAL

1.

Remove front under cover fixing clips and bolts.

2.

Remove front under cover.

INSTALLATION

Install in the reverse order of removal.

1.

Floor under cover

JMKIA2773ZZ

EXT-32

< REMOVAL AND INSTALLATION >

FILLET MOLDING

FILLET MOLDING

Exploded View

INFOID:0000000005248873

Removal and Installation

INFOID:0000000005248874

REMOVAL

FRONT FILLET MOLDING

1.

Remove front fillet molding fixing screws.

1.

Front fillet molding

2.

Grommet

3.

Rear fillet molding

: Clip

: Pawl

: Vehicle front

Refer to 

GI-4, "Components"

 for symbols in the figure.

JMKIA2730ZZ

FILLET MOLDING

EXT-33

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

L

M

A

B

EXT

N

O

P

2.

Disengage the fillet molding (1) fixing clips from front end to rear
end with a remover tool (A).

CAUTION:

• Apply a protective tape (B) on the bumper fascia and

fender to protect the painted surface from damage.

• Never use an item as a remover tool that could damage

bumper fascia assembly and front fender.

• Disengage the clips slowly and carefully.
• Never pull the front fillet molding strongly.

REAR FILLET MOLDING

1.

Remove rear fillet molding fixing screws.

2.

Disengage the pawls from the rear fillet molding (1) rear side.

3.

Disengage the clips from the rear fillet molding (1) from the rear
end to front end with a remover tool (A).

CAUTION:

• Apply protective tape (B) on the body to protect the

painted surface from damage.

• Never use an item as a remover tool which could damage

body panel.

• Disengage the clips slowly and carefully.
• Never pull the rear fillet molding strongly.

4.

Remove the center mud guard (1) mounting bolts (A) from rear
end of center mud guard under side.

5.

Disengage the center mud guard fixing clips with a remover tool
(B), and then release the rear end of center mud guard.

CAUTION:

• Apply a protective tape (C) on the body to protect the

painted surface from damage.

• Never use an item as a remover tool which could damage

body panel.

• Disengage the clips slowly and carefully.
• Never pull the center mud guard strongly.

6.

Remove the rear fillet molding from the vehicle.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

• When installing, visually check the fillet molding and the clips, then replace them with new parts if

they are damaged. 

• When installing fillet molding, check that blind clips are securely fitted in body panel holes, and then

press them in.

: Clip

JMKIA2731ZZ

: Pawl

JMKIA2733ZZ

: Clip

JMKIA2734ZZ

JMKIA2735ZZ

 

 

 

 

 

 

 

Content   ..  1068  1069  1070  1071   ..