Infiniti FX35, FX50 (S51). Manual - part 1058

EXL-228

< REMOVAL AND INSTALLATION >

[XENON TYPE]

FRONT COMBINATION LAMP

Removal and Installation

INFOID:0000000005244800

REMOVAL

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

1.

Remove the front bumper fascia. Refer to 

EXT-12, "Exploded View"

.

2.

Remove the headlamp mounting bolts.

3.

Remove the holding clip (A)* and the harness clip (B).
*: Left side only

4.

Pull out the headlamp assembly forward the vehicle. 

5.

Disconnect the connector before removing the headlamp
assembly. 

INSTALLATION

Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to 

EXL-223, "Description"

.

Replacement

INFOID:0000000005244801

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.

1.

Front side marker lamp bulb

2.

Front side marker lamp bulb socket

3.

Front turn signal lamp bulb

4.

Front turn signal lamp bulb socket

5.

Parking lamp bulb

6.

Parking lamp bulb socket

7.

Resin cap

8.

Seal packing

9.

Xenon bulb socket

10.

Xenon bulb

11. Bumper bracket

12. Seal packing

13.

HID control unit

14. Headlamp housing assembly

15. Retaining spring

Refer to 

GI-4, "Components"

 for symbols not described above.

JPMIA1103ZZ

JPMIA1104ZZ

FRONT COMBINATION LAMP

EXL-229

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

HEADLAMP BULB

1.

Remove the engine room cover*. Refer to 

EM-174, "Exploded View"

.

* : VK Engine Models

2.

Remove the fender rubber protector. Keep a service area.

3.

Rotate the resin cap counterclockwise and unlock it.

4.

Rotate the bulb socket counterclockwise and unlock it.

5.

Remove the retaining spring lock. Remove the bulb from the
headlamp.

CAUTION:

Never break the xenon bulb ceramic tube when replacing
the bulb. 

PARKING LAMP BULB

1.

Remove the engine room cover*. Refer to 

EM-174, "Exploded View"

.

* : VK Engine Models

2.

Remove the fender rubber protector. Keep a service area.

3.

Rotate the bulb socket counterclockwise and unlock it.

4.

Remove the bulb from the bulb socket.

FRONT TURN SIGNAL LAMP BULB

1.

Remove the engine room cover*. Refer to 

EM-174, "Exploded View"

.

* : VK Engine Models

2.

Remove the fender rubber protector. Keep a service area.

3.

Rotate the bulb socket counterclockwise and unlock it.

4.

Remove the bulb from the bulb socket.

FRONT SIDE MARKER LAMP BULB

1.

Remove the engine room cover*. Refer to 

EM-174, "Exploded View"

.

* : VK Engine Models

2.

Remove the fender rubber protector. Keep a service area.

3.

Rotate the bulb socket counterclockwise and unlock it.

4.

Remove the bulb from the bulb socket.

Disassembly and Assembly

INFOID:0000000005244802

DISASSEMBLY

1.

Rotate the resin cap counterclockwise and unlock it.

2.

Rotate the xenon bulb socket counterclockwise and unlock it.

3.

Remove the retaining spring lock. Remove the xenon bulb.

4.

Remove the bumper bracket.

5.

Remove the HID control unit installation screw.

6.

Remove the screw. Disconnect the connector from HID control unit.

7.

Pull out the xenon bulb socket from the headlamp housing assembly.

8.

Rotate the parking lamp bulb socket counterclockwise and unlock it.

9.

Remove the bulb from the parking lamp bulb socket.

10. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.

11. Remove the bulb from the front turn signal lamp bulb socket.

JPMIA1105ZZ

EXL-230

< REMOVAL AND INSTALLATION >

[XENON TYPE]

FRONT COMBINATION LAMP

12. Rotate the front side marker lamp bulb socket counterclockwise and unlock it.

13. Remove the bulb from the front side marker lamp bulb socket.

ASSEMBLY

Assemble in the reverse order of disassembly.

CAUTION:

• Install HID control unit securely.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.

FRONT FOG LAMP

EXL-231

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

FRONT FOG LAMP

Exploded View

INFOID:0000000005244803

Removal and Installation

INFOID:0000000005244804

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.

Remove the front fender protector. Keep a service area. Refer to 

EXT-25, "FENDER PROTECTOR :

Exploded View"

.

2.

Remove the front fog lamp connector.

3.

Remove the screw.

4.

Disengage the pawl. And then remove the front fog lamp.

INSTALLATION

Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to 

EXL-225, "Description"

Replacement

INFOID:0000000005244805

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

FRONT FOG LAMP BULB

1.

Remove the front fender protector. Keep a service area. Refer to 

EXT-25, "FENDER PROTECTOR :

Exploded View"

.

1.

Front fog lamp

2.

Front fog lamp finisher

: Pawl

JPMIA1106ZZ