Infiniti FX35, FX50 (S51). Manual - part 1055

 

  Index      Infiniti     Infiniti FX35, FX50 (S51) - service repair manual 2010 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1053  1054  1055  1056   ..

 

 

Infiniti FX35, FX50 (S51). Manual - part 1055

 

 

EXL-216

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

EXTERIOR LIGHTING SYSTEM SYMPTOMS

• Hazard warning lamp does not activate.
• Hazard warning lamp continues activating.
(Turn signal is normal.)

• Hazard switch
• Harness between the hazard 

switch and BCM

• BCM

Hazard switch
Refer to 

EXL-86

.

Headlamp auto aiming does not activate.
(AFS is normal.)

• Harness between AFS control 

unit and aiming motor

• Front combination lamp

(Aiming motor)

• AFS control unit

Headlamp levelizer circuit
Refer to 

EXL-74

.

AFS OFF indicator lamp is not turned ON.

• AFS OFF indicator lamp signal
- Unified meter and A/C amp. 
- AFS control unit
• Combination meter

Unified meter and A/C amp.
Data monitor "AFS OFF IND"

Symptom

Possible cause

Inspection item

NORMAL OPERATING CONDITION

EXL-217

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

NORMAL OPERATING CONDITION

Description

INFOID:0000000005244784

XENON HEADLAMP

• Brightness and the color of light may change slightly immediately after turning the headlamp ON until the

xenon bulb becomes stable. This is normal.

• Illumination time lag may occur between right and left. This is normal.

AUTO LIGHT SYSTEM

The headlamp may not be turned ON/OFF immediately after passing dark area or bright area (short tunnel,
sky bridge, shadowed area etc.) while using the auto light system. This causes for the control difference. This
is normal.

EXL-218

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM

BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM

Description

INFOID:0000000005244785

The headlamp (both sides) does not switch to the high beam when setting to the lighting switch HI or PASS.

Diagnosis Procedure

INFOID:0000000005244786

1.

COMBINATION SWITCH INSPECTION

Check the combination switch. Refer to 

BCS-81, "Symptom Table"

.

Is the combination switch normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning part.

2.

CHECK HEADLAMP (HI) REQUEST SIGNAL INPUT

CONSULT-III DATA MONITOR

1.

Select "HL HI REQ" of IPDM E/R data monitor item.

2.

With operating the lighting switch, check the monitor status.

Is the item status normal?

YES

>> GO TO 3.

NO

>> Replace BCM.

3.

HEADLAMP (HI) CIRCUIT INSPECTION

Check the headlamp (HI) circuit. Refer to 

EXL-67

.

Is the headlamp (HI) circuit normal?

YES

>> Replace IPDM E/R.

NO

>> Repair or replace the malfunctioning part.

Monitor item

Condition

Monitor status

HL HI REQ

Lighting switch
(2ND)

HI or PASS

On

Except for HI or 
PASS

Off

BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON

EXL-219

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON

Description

INFOID:0000000005244787

The headlamps (both sides) are not turned ON in any condition.

Diagnosis Procedure

INFOID:0000000005244788

1.

COMBINATION SWITCH INSPECTION

Check the combination switch. Refer to 

BCS-81, "Symptom Table"

.

Is the combination switch normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning part.

2.

CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT

CONSULT-III DATA MONITOR

1.

Select "HL LO REQ" of IPDM E/R data monitor item.

2.

With operating the lighting switch, check the monitor status.

Is the item status normal?

YES

>> GO TO 3.

NO

>> Replace BCM.

3.

HEADLAMP (LO) CIRCUIT INSPECTION

Check the headlamp (LO) circuit. Refer to 

EXL-70

.

Is the headlamp (LO) circuit normal?

YES

>> Replace IPDM E/R.

NO

>> Repair or replace the malfunctioning part.

Monitor item

Condition

Monitor status

HL LO REQ

Lighting switch

2ND

On

OFF

Off

 

 

 

 

 

 

 

Content   ..  1053  1054  1055  1056   ..