|
|
AV POWER SUPPLY AND GROUND CIRCUIT AV-101 < DTC/CIRCUIT DIAGNOSIS > [WITHOUT NAVIGATION] C D E F G H I J K L M B A O P POWER SUPPLY AND GROUND CIRCUIT AV CONTROL UNIT AV CONTROL UNIT : Diagnosis Procedure INFOID:0000000005528981 1. CHECK FUSE Check for blown fuses. Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate cause of malfunction before installing new fuse. 2. CHECK POWER SUPPLY CIRCUIT Check voltage between AV control unit harness connectors and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between AV control unit and fuse. 3. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect AV control unit connectors. 3. Check continuity between AV control unit harness connectors and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector. FRONT DISPLAY UNIT FRONT DISPLAY UNIT : Diagnosis Procedure INFOID:0000000005528982 1. CHECK POWER SUPPLY CIRCUIT (DISPLAY SIDE) Check voltage between display unit harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 2. 2. CHECK POWER SUPPLY CIRCUIT (CONTINUITY) 1. Turn ignition switch OFF. 2. Disconnect the harness connector between front display unit and AV control unit. 3. Check continuity between front display unit harness connector and AV control unit harness connector. Power source Fuse No. Battery 34 Ignition switch ACC or ON 19 Signal name Connector No. Terminal No. Ignition switch position Value (Approx.) Battery power supply M201 19 OFF Battery voltage ACC power supply M201 7 ACC Battery voltage Signal name Connector No. Terminal No. Ignition switch position Continuity Ground M201 20 OFF Existed Signal name Connector No. Terminal No. Ignition switch position Value (Approx.) Inverter VCC M194 2 ACC 8.8 V Signal VCC 3 |