|
|
FRONT COIL SPRING AND STRUT FSU-29 < ON-VEHICLE REPAIR > [AWD] C D F G H I J K L M A B FSU N O P 1. Install strut attachment (A) [SST: ST35652000 ( – )] to strut and secure it in a vise. CAUTION: When installing the strut attachment to strut, wrap a shop 2. Using a spring compressor (A) (commercial service tool), com- CAUTION: Be sure a spring compressor is securely attached coil 3. Make sure coil spring with a spring compressor between rubber 4. Remove mounting seal, strut mounting bracket, rubber seat, 5. After remove coil spring with a spring compressor, and then CAUTION: Loosen while making sure coil spring attachment position does not move. 6. Remove the strut attachment from strut. ASSEMBLY 1. Install strut attachment (A) [SST: ST35652000 ( − )] to strut and secure it in a vise. CAUTION: When installing the strut attachment to strut, wrap a shop cloth around strut to protect it from 2. Compress coil spring using a spring compressor (commercial service tool), and install it onto strut. CAUTION: • Install with the large-diameter side (A) facing up and the small-diameter side (B) facing down. • Be sure a spring compress or is securely attached to coil spring. Compress coil spring. 3. Install the strut mounting bracket and rubber seat. CAUTION: Align the paint mark (A) to the stud bolt (1) position when 4. Apply soapy water to bound bumper. CAUTION: Never use machine oil. JPEIA0006ZZ JPEIA0007ZZ PEIA0108E JPEIA0009ZZ |